Panasonic WJ-HD100 Operating Instructions Manual

Also see for WJHD100 - DIGITAL DISC RECORDE: Specifications Operating instructions Operating instructions Specification sheet

Panasonic WJ-HD100 Operating Instructions Manual Manual pdf 30 page image

30 COMMUNICATION SETUPCommunication parameters are set corresponding to theconnected devices and system configurations as follows. Protocol501 PROTOCOL1. Move the cursor to PROTOCOL with the [] or [] but-ton.2. Select the suitable protocol with the JogDial.The default value is PS • DATA.PS . DATA: Select when the communication chain oper-ates PS • DATA protocol.VCR: Select when other than PS • DATA is used. Unit Address502 UNIT ADDRESSThe unit address is set either way by this setup on the mon-itor or by the DIP switch on the rear panel. Address setupby the DIP switch has the first priority over this setup. Makecertain to set the DIP switch #1 through #4 to OFF whensetting unit address on the monitor.1. Move the cursor to UNIT ADDRESS with the [] or []button.2. Select the address with the JogDial.The default value is 1.From 1 to 96: Set an address unique in the chain. Baud Rate503 BAUD RATEDISPLAY SELECTLCD CONTRASTDISPLAY SELECTLCD CONTRAST1. Move the cursor to BAUD RATE with the [] or [] but-ton.2. Select the rate with the JogDial.The default value is 9 600 bit per second.4800: 4 800 bps9600: 9 600 bps19200: 19 200 bps Data Bit504 DATA BIT1. Move the cursor to DATA BIT with the [] or [] button.2. Select the bit length with the JogDial.The default value is 8 bit.7: 7 bit8: 8 bit, when PS • DATA is selected for the protocol thiswill be 8.DISPLAY SELECTLCD CONTRASTUNIT ADDRESS 1BAUD RATE 9600DATA BIT 8PARITY CHECK NONESTOP BIT 1DISPLAY SELECTLCD CONTRASTBAUD RATE 9600DATA BIT 8PARITY CHECK NONESTOP BIT 1WAIT TIME OFFCOMMUNICATION SETUPPROTOCOL PS•DATAUNIT ADDRESS 1BAUD RATE 9600DATA BIT 8PARITY CHECK NONESTOP BIT 1WAIT TIME OFFPROTOCOL PS.DATAUNIT ADDRESS 1BAUD RATE 9600DATA BIT 8PARITY CHECK NONESTOP BIT 1PROTOCOL PS•DATAUNIT ADDRESS 1BAUD RATE 9600DATA BIT 8Intelligent Security & Fire