Panasonic WJ-HD100 Operating Instructions Manual

Also see for WJHD100 - DIGITAL DISC RECORDE: Specifications Operating instructions Operating instructions Specification sheet

Panasonic WJ-HD100 Operating Instructions Manual Manual pdf 6 page image

6MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS Front ViewOPERATETIMER HDDALARMSUSPENDDAYLIGHTSAVINGSFULLLOCKMEMORY CARD DISPLAY SELECT STOP PLAY RECPUSH– PAUSE SETALARM SEARCH STEP REW/FFPLAY MODE SELECT/ // /SETUP/ESCq w ert y u i o !0 !1 !2 !3 !4!5 !6 !7 !8LCD CONTRASTDigital Disk Recorder WJ-HDq Operate Indicator [OPERATE]Lights while the power switch on the rear is turned on.w Timer Record Reservation Indicator [TIMER]Lights when the reservation is made for internal timerrecording.e Alarm Suspension Indicator [ALARM SUSPEND]Lights when an alarm is activated, and alarm suspen-sion is set to ON not to start recording pictures or beep-ing buzzer except logging event history.r Summer Time Button [DAYLIGHT SAVINGS]Press the obscured button with a pin to shift the internalclock to the summer time system or vice versa.t HDD Access Indicator [HDD]Lights while the disk is being accessed.y Full Indicator [FULL]Blinks when the remaining capacity on the disk is low-ered to the preset value, and lights when the capacitycomes to the full.u Lock Indicator [LOCK]Lights when buttons and JogDial on the front panel aredisabled.i Memory Card Slot [MEMORY CARD]Open the lid to put the CompactFlash card in to or outfrom the slot. The card is used to store still pictures forbrowsing them on the personal computer.o LCDDisplays setup parameters while setting, and operatingstatus while recording or playing back.!0 LCD Button [DISPLAY SELECT]There are five positions to press; up, down, left, rightand the center. Press the appropriate positions toselect desired parameter on the LCD.!1 LCD Contrast Control [LCD CONTRAST]Adjust the contrast by rotating the control knob with asmall screw driver.!2 Stop and Setup/ Escape Button[ STOP] [SETUP/ESC]Stops recording or playback by pressing this button inthe mode other than setting.Holding down this button for 2 seconds calls up setupmenus or escapes from the setup.Press this button to go one step back to the previousselection in the setup menu.!3 Play button [5 PLAY]Press this button to start playback. The LED lights whileplaying back, and blinks while pausing or searching.!4 Recording button [ REC]Press this button to start recording. The LED lights whilerecording, and blinks while alarm recording.!5 to !8 are PLAY MODE SELECT buttons.!5 Alarm search button [ALARM SEARCH]Press this button to search for desired record amongalarm log. The LED lights while searching.!6 Step and Down button [STEP] [A❚ ❚/❚ ❚B C]Press this button to start playing back still pictures fieldby field. The LED lights while playing back.Press this button to move the cursor downward on themonitor while setting up.Intelligent Security & Fire