48It is possible to copy (duplicate) manually the imagesrecorded on the disk area selected with the DISK SELECTwindow (page 25) to the HDD copy area or the externalrecording device (DVD-RAM disk, DVD-R disk, CD-R disk)connected to the unit.It is recommended to make back-up copies on a regularbasis for unexpected situations such as malfunction of thehard disk.Manual copy is available during the following.• While displaying live images• While pausing playback of recorded images• When displaying a search window (Recording event listwindow, VMD search list window, Marking list window)(Manual copy is not available when a thumbnail windowis displayed.)Notes:• The auto copy function is available for copying record-ed images to the DVD-RAM disk automatically. Whenthe auto copy function is enabled, manual copy is notavailable. Refer to a system administrator for furtherinformation about the auto copy function.• To copy during playback of recorded images, pausethe playback temporarily.• To copy recorded images on the DVD-RAM disk, for-matting (initializing) the DVD-RAM disk is required inadvance. Refer to page 52 for the descriptions of howto format DVD-RAM disks.• Copy time may differ depending on the size of therecorded image. It may take longer to copy imagesrecorded in higher quality and resolution even whenselecting the same number of cameras and designatingthe same recording duration.z Press the SHIFT button.The SHIFT indicator will light.To copy recorded images during playback, pause the play-back temporarily.x Press the COPY button.The DATA COPY window will be displayed on monitor 2and the VGA monitor.The DATA COPY window will not be displayed when athumbnail window is displayed.In this case, display a list window using the arrows button(C D).Notes:• When the auto copy function is enabled, the DATACOPY window will not be displayed.• The copy cancel window will be displayed if the userwho started manual copy presses the COPY button dur-ing the manual copy. (It is impossible to stop manualcopy performed by other users.)c Perform the settings for data copy (camerachannel, time range, the disk on which imagesare to be copied). Move the cursor to each set-ting item using the arrows button and select aparameter by rotating the jog dial.Note: Time range to be set for "PERIOD" should be 30 min-utes or less to copy images for one attempt.COPYING (Duplicate)R2RMONITOR1MONITOR2159132610/014371115481216SEQSHIFT OSDSTOP PLAY PAUSE REC - REC STOPZOOM/FOCUSTEXTCOPYDISK SELECTEL-ZOOMMARKLOGOUTIRISPRESET/AUTOA-BREPEATGOTOLASTLISTEDSEARCHBUSYSETUP/ESCSETREV– +FWDPAN/TILTSLOW[WJ-HD316]LOGOUTR2RMONITOR1MONITOR21472580369TEXTSEQSHIFT OSDZOOM/FOCUSCOPYDISK SELECTEL-ZOOMMARKIRISPRESET/AUTOA-BREPEATGOTOLASTLISTEDSEARCHBUSYSETUP/ESCSETREV– +FWDSTOP PLAY PAUSE REC - REC STOPPAN/TILTSLOW[WJ-HD309]PAN/TILTPAN/TILTz x c cz x c cDATA COPYCAMERAPERIODCOPY DRIVE.1 JAN 03 12 05 AM1 JAN 03 121 2 3 4 5 6 7 89 10 11 12 13 14 15 1600 AM. :OK CANCELHDD COPY AREA COPY 1 COPY 2. . :