87 Alarm SuspensionThis function disables the activation of the alarm link andinstead enables storing of any alarm activated in theERROR REPORT table.It is used to suspend the alarm link during the DiskRecorder’s setup.To suspend the alarm:1. Press the ALARM RESET and REC PREVIEW buttonsat the same time.The ALARM SUSPEND indicator lights to indicate thatthis function is selected.2. Press the ALARM RESET button to reset the alarm sus-pension.The ALARM SUSPEND indicator goes off. Alarm Reset Manual ResetWhen the alarm is activated, the ALARM indicator blinks.The indicator keeps blinking until all alarms are cleared bypressing the ALARM RESET button.The blinking or lit indicator goes off. Auto ResetThe alarm is automatically reset after the programmedalarm Auto Reset time has elapsed or the lost video signalhas been recovered.The ALARM indicator changes from blinking to a steadylight.Pressing the ALARM RESET button will clear the alarmand switch the indicator off. External ResetThe alarm is reset by a recovery signal received from theexternal equipment at pin 8 of the ALARM port located onthe rear of the Disk Recorder.The ALARM indicator changes from blinking to a steadylight.ALARMALARMRESETALARMRESETALARMSUSPENDALARMRESETALARMSUSPENDREC PREVIEW

operating instructions

PREFACE

PRECAUTIONS

major operating controls and their functions

rear view

I WV-CU50 Remote Controller

I Installing the Optional Motion Detector Board

I Mounting into the Rack

basic system

I Connection with the Monitors

I Alarm Port Connection

I Control Port Connection

I Connection with the Extension Unit

I Connection with the DVD Extension Unit

I Connection to PS • Data Compatible Equipment

I Connection with the PC

PREPARATIONS

POWER UP PROCEDURE

FORMATTING THE HARD DISK

FORMATTING THE DVD-RAM DISK

MIRRORING FUNCTION

DISK REMOVE

I Status Display

hard disk

I Time Lapse Recording

I One Shot Recording

SETUP PROCEDURES

setup menu

I Programming Menu Setup

TIMER SETTING

RECORDING SETUP

I Group Setup

I Recording of the Title Display

I Hard Disk End Setup

I Event Recording (Manual Recording)

I Alarm Active Mode (Manual Recording)

I Special Day Timer

I External Program Timer

event recording

I Multi Shot Recording (Internal Timer)

I One Shot Recording (Internal Timer)

Emergency Recording (Time Lapse Recording)

MULTIPLEXER SETUP

I Sequence Setup (Spot Monitor)

I Power on Setting (Spot Monitor)

Secret View Setting

I Alarm Auto Reset Setting

I Alarm Buzzer Setting

I Alarm Mode on the Multiscreen Monitor

I Display Setting (Multiscreen Monitor)

I Title Display Setting (Spot Monitor)

I Clock and Status Display Position Setting

I Network Setup

I Time Adjustment Setting

I Password Lock Setting

I Disk Management

I Error Report

I Alarm Recording Backup

I Emergency Recording Backup

OPERATING PROCEDURES

I Controlling the Multiscreen Monitor

I Alarm Operation

I Alarm Reset

I Internal Timer Recording

I Alarm Recording

I Emergency Recording

basic playback

I Search Record Function

I Display on the Monitor

BACKUP FUNCTION

I Manual Erase Function

BUTTON LOCKED FUNCTION

PLAYBACK OF BACKUP DATA

SPECIFICATIONS

Panasonic WJ-HD500B Operating Instructions Manual

WJ-HD500B