Panasonic WJ-MP204C Operating Instructions Manual

Also see for WJMP204C - DATA MULTIPLEX UNIT: Product catalog Operating instructions

Panasonic WJ-MP204C Operating Instructions Manual Manual pdf 28 page image

28Camera selection and alarm operations are made on thefront panel of the unit or WV-CU360C System Controller. Camera Selection Front Panel Operation• You need to remove the front cover loosening the screwwith a screw driver before starting operation.• Press a camera number button.The selected camera picture is displayed on the moni-tor connected to the SPOT OUT terminal on the rear ofthe unit. WV-CU360C Operation• Enter a camera number with numeric buttons, thenpress the CAM/SET button.The selected camera picture is displayed on the monitorconnected to the SPOT OUT terminal on the rear of the unit. Alarm Operation Alarm InputAn alarm arises in the following cases.• Terminal alarmA sensor input is supplied to the unit telling that achange has been detected.• Site alarmA camera detects motion change in video (VMD, VideoMotion Detection). Processing• The spot image changes to that of the alarm activatedcamera when ALARM MODE is set to ON in the setup.• The camera moves to the preset position.• “ALARM ***” blinks overlaid on the spot image whenALARM DISPLAY is set to ON.• The alarm indicator blinks. Alarm OutputThe alarm activation is informed to the connected peripher-als via the DATA terminal or ALARM/REMOTE terminalwhen the terminal is set to the alarm output mode. Outputduration is specified with the ALARM OUTPUT setup.• Digital Disk Recorder enters a specific recording mode.• Video Multiplexer changes pick-up frame rate andframe order.• System Controller makes the alarm indicator blink onthe controller.OPERATION1 2 3 4CAMSETALARM 001