Images recorded on the SD memory card on the camera can be obtained as follows.Refer to the setup instructions (PDF) for further information about the SD memory card recording and for how to setthe recording rate for the SD memory card recording.Screenshot 1When the SD memory card on the connected cameracontains recorded images, the SD memory data obtainbutton (SD in red) will be displayed in the [REC] box.Screenshot 2The confirmation window will be displayed.Screenshot 3The login window will be displayed while the SD memo-ry data is being obtained.Step 1Click the SD memory data obtain button.Important:• The SD memory data obtain button can be clickedby only users whose user level is "LV1".• SD memory data cannot be obtained when theemergency recording is being performed.Notes:• The letters "SD" on the SD memory data obtain but-ton will be displayed in blue when there is no record-ed image on the SD memory card.• When the SD memory data obtain button is clickedwhile the letters "SD" are displayed in blue, the unitwill check if there is any recorded image on the SDmemory card or not. When a recorded image isfound, the letters "SD" on the SD memory dataobtain button will turn red.Step 2Click the [OK] button.Important:When obtaining the SD memory data starts, allusers will forcibly be logged out and all recordingscurrently being performed will stop.Step 3To cancel to obtain the SD memory data, click the[login] button.Notes:• When the emergency recording is triggered in theprocess of obtaining the SD memory data, obtainingof the SD memory data will be canceled and theemergency recording will start.• When obtaining the SD memory data is completed,the top page or the authentication window will bedisplayed.40Obtain Images on an SD memory card