Panasonic WJ-ND300A/10000V Operating Instructions Manual

Also see for WJ-ND300A: Brochure Reference Manual Operating instructions Operating instructions

Contents

Panasonic WJ-ND300A/10000V Operating Instructions Manual Manual pdf 58 page image

58EVT-**% orEVT-FULLCPY-**% orCPY-FULLCAM cc ERRLINK_ERR_0pCAM cc SD ERRHDD-5ERREVENT-HDD FULLHDD-6ERRCOPY-HDD FULLNET-3-0ERRCAMERA cc ERRORNET-1-p ERRNW LINK ERRORNET_5-0 ERR CAM-ERA cc SD ERROR(or no indication)The HDD is almost full orcompletely full.Communication with thenetwork camera is unstable,or no network camera isconnected.The unit is disconnectedfrom the network.An SD card memory erroroccurred. The SD memorycard may be not detected,or there is no availablespace on the SD memorycard on the camera.Initialize or replace the HDD. (*1)Check the communication status betweenthis unit and the network camera.Check the network connection.Check the SD memory card and the settingson the camera.Contact the dealer.After replacing the faulty disk, the error sta-tus will be canceled. (*1)SMART u-d HDD-1-u-d ERRHDD WARNINGThe HDD may be malfunc-tioning and may work incor-rectly.Contact the dealer to replace the HDD. (*1)H.METER u-d HDD-2-u-d ERRHDD HOUR METERThe set time for the hourmeter has passed.It may be reaching the endof the HDD’s lifetime.If this error occurs frequently, contact thedealer to replace the HDD. (*1)V-ERROR vvvREMOVE u-d HDD-3-u-d ERRHDD REMOVEDData on each recordingarea is lost by the"REMOVE" error, etc.The HDD has beenunmounted from the systemautomatically.Contact the dealer.After replacing the faulty disk, the error sta-tus will be canceled. (*1)W-ERR u-d Failed to write/read data onthe HDD.The HDD may be malfunc-tioning.If this error occurs frequently, contact thedealer to replace the HDD. (*1)R-ERR u-dHDu-d 1DOWN HDD-10 ERRRAID5 1DOWNA HDD of RAID is failed. Contact the dealer.After recovering/replacing the faulty disk, theerror status will be canceled.HDu 2DOWNSKIP u-dPlease Setup onDISK CONFIGMENUThe unit is currently inoper-able since the disk array ischanged.Display "DISK CONFIG MENU" and initial-ize or replace the hard disk.When the Error Log is DisplayedDo the following when the error log is displayed on the LCD.Error Log Indication on theLCDDescription Solution