23Terminal Alarm connectionWhen a signal is supplied to the alarm input terminals recording and displaying of camera images will be performed accordingto the settings.When an alarm device such as a buzzer, a lamp, etc., is installed outside, connect them to the alarm output terminals (pin nos.9 - 12, pin nos. 23 - 25) or to the alarm output terminals (pin nos. 1 - 9) of the ALARM/CONTROL terminal.Alarming devicesRelay, etc.Alarming devicesInstall according toyour needs.Relay, etc.(GND)Sensor Security doorswitch(Alarm input 16)(Alarm input 1)o!3!3 o!4@2q(Alarm output 1)(Alarm output 16)(Signal ground)(Signal ground)Install according toyour needs.ALARMALARM/CONTROLTime and polarities of the ALARM/CONTROL terminal and the ALARM terminalAlarm inputAlarm outputNetwork error outputAlarm reset inputEmergency recording inputAlarm output for available disk space ofthe copy/event recording areaHDD error outputCamera error outputError outputOutage processing end outputTime adjustment I/OAlarm suspend inputOutage detection inputExternal recording mode changeoverActive time100 ms or moreThe set time on the SETUP MENUUntil the network error is cleared, or until the ALARMRESET button on the operation window is clicked.100 ms or more100 ms or moreWhile the size of the available disk space is lessthan the set sizeFrom the time of the error occurrence until thesounding buzzer is resetFrom the time of the error occurrence until thesounding buzzer or the camera is resetFrom the time of the error occurrence until thesounding buzzer is reset1 s or moreInput: 100 ms or moreOutput: 1 s100 ms or more5 s or more100 ms or moreNoteN.O.: L activeN.C.: H activeL activeL activeL activeL activeL activeL activeL activeL activeH activeL activeL active, judged by levelL activeL active

installation guide

Limitation of Liability

Important Safety Instructions

Precautions

Trademarks and Registered Trademarks

Preface

Major Operating Controls and Their Functions

rear view

Rack Mounting

Connections

Connection between cameras and PCs

Connecting with Extension Unit

I How to Use the Terminals of the ALARM/CONTROL Connector

I How to Use the Terminals of the ALARM Connector

alarm connection

How to Replace Hard Disk Drives

Turn On/Off the Power of the Unit

Turn off the Power of the Unit

Operation Using the Buttons on the Front Panel

Check the Network Settings

Set the Network Settings

Key Lock Settings

Set the HDD Safety Mode

Check the Unit Number of the Extension Unit

Reboot the Unit Manually

Troubleshooting

Specification

Panasonic WJ-ND300A Installation Manual

WJ-ND300A

operating the unit for the first time

operating instructions

Precaution

System Requirements for a PC

Start/Exit the Software

Main Window

Icons in the Tree Display Area

Operation Flow

Detect WJ-ND300 (A)/Cameras and Confirm the Current Settings

Arrange the Camera Number by Moving/Deleting the Camera Icon

Delete a camera icon

Edit the Settings

Register the WJ-ND300 (A) and Cameras, and Confirm the Result CAM IP Auto Addressing)

Register the WJ-ND300 (A) and Cameras, and Confirm the Result Manual Registration)

Detect WJ-ND200/Cameras and Confirm the Current Settings

Tips to Configure the Settings

About these Operating Instructions

Abbreviations

Recording/Playback/Live Image Transmission

Restrictions when operating MPEG-4 images

Recording

Playback

Playback after Selecting a Disk

Playback from a Designated Time and Date

Search and Play Recorded Event

How to Operate

Monitor Live Images

Display Images from Cameras on a 4-Screen

Display Images in the Sequential Display

Control Cameras

Zoom/Focus/Brightness Operations

Move a Camera to the Preset Position

Action at an Event Occurrence

Cancel the Alarm Action

Copying (Duplicate)

Deletion of Recorded Images Saved on the Hard Disk Manually

Display/Edit the Text Information

Transmits Camera Images onto an FTP Server

Check Logs

Check the Access Log

Check the Event Log

Check the Network Trouble Log

Obtain Images on an SD memory card

Download Recorded Images

Play Downloaded Images

Install the Viewer Software

Uninstalling the Viewer Software

Save Downloaded Images

Print the Displayed Image

Perform the Alteration Detection

Notification by E-Mail

Warning Mail Notification

About the Error Log

When the Error Log is Displayed

Operations Flow

Performing the Network Settings

Performing the Network Settings of a PC

About the Network Security of this Unit

Display the Operation Window

About the Operation Window

Control] Tab

Cam Select] Tab

Setup] Tab (Quick)

Setup] Tab (Advanced)

Status Display Area

Playback Point Operation Area

CAM] Tab

Setup Menu (Quick)

Display/System Settings [Display Setup]

Camera Network Settings and Group Settings [Camera Setup]

Perform the Settings for Network [Network Setup]

Setup Menu (Advanced) Chart

Basic Operation with the Setup Menu (Advanced)

Perform the Settings for the System [System]

Functions for Recording [Recording]

Functions for Events [Event]

Settings for the Recording/Event Schedule [Schedule]

Settings Relating to Cameras [Camera]

Settings for Communication with other Devices [Comm]

Settings Relating to the User Authentication [User Mng.]

Settings for Maintenance [Maintenance]

About the Hard Disk Drives

Display the HDD DISK MENU

Initialize the Hard Disk Drive [Format]

Remove the Hard Disk Drive from the System Logically [Remove]

specifications

Rec & Event Setup]

WJ-ND300A/D