31Copying (Duplicate)Images recorded on the normal area/event area can be copied manually onto the copy area of the hard disk drive.It is recommended to make back-up copies on a regular basis for unexpected situations such as malfunction of thehard disk. Manual copy is available during the following.• While displaying live images• While playback or pausing playback of recorded imagesScreenshot 1Display the [Control] tab. Step 1Click the button in the [Copy] box of the [Control] tab.Note:It is impossible to copy recorded images in the fol-lowing cases.(The pop-up window will be displayed when the but-ton in the [Copy] box is clicked.)• When copying is being performed• When a download is being performed (page 41)• When "COPY AREA" is selected for "DiskSelect"Screenshot 2The "Data Copy" window will be displayed.Notes:• It is possible to cancel copying using the copy can-cel window that can be displayed by clicking the but-ton in the [Copy] box during copying.• Copying may start from a point several seconds laterthan the designated start time when copying MPEG-4 images.• SD memory data of the selected camera channeland time range will also be copied onto the copyarea.Step 2Click to select the desired camera channel to be copied.It is possible to select two or more camera channels.Step 3Select a start time and an end time for copying by click-ing the [i] button.Step 4Determine which camera channel is to be used as astandard time zone when searching.(It is necessary to determine the primary time and dateby selecting a camera channel when cameras areinstalled in two or more countries.)