20● Major functionsLive image displayFunction Description1-screen Live images (with audio) from a camera will be displayed on a 1-screen.When displaying on a 1-screen, it is possible to operate the camera via the recorder. (Refer to theoperating instructions (PDF).)4-screen Live images from multiple cameras will be displayed on a 4-screen.Sequential display Live images from multiple cameras will sequentially be displayed according to the settings.RecordingRecording mode Priority* DescriptionEmergency recording 1 Recording triggered by use of an external switch when an emergency occurs.Post-event recording 2 Recording of images for the set period of time just after an event occurrence that is tobe automatically performed.Manual recording 3 Recording manually started and stopped.Schedule recording 4 Recording to be automatically performed according to the schedules set in advance.Pre-event recording 5 Recording of images for the set period of time just before an event occurrence that isto be automatically performed.* Priority: When two or more recordings with different recording modes started simultaneously, only recording with the highest pri-ority will start.● Setup menu and its itemsRefer to the setup instructions (PDF) for further information about the setup menu and its items.■ Network● Remote operationIt is possible to operate the recorder and the cameras connected to the recorder using a PC on a network.Operable functionsWhen displaying live images using a camera with the panning/tilting function.Function DescriptionPan/tilt Adjust the horizontal/vertical position of the camera.Zoom Zoom in/out the live image.Focus Adjust the focal point.Brightness Adjust the lens iris (brightness).Preset position operation Move the camera to the preset position (that is determined on the camera's setup menu and regis-tered in the recorder).Auto Activate the designated auto function of the camera.