39[Date]Set the current date. Select the year, month and day fromthe calendar.[<>] button: Selects the previous or next year.[] button: Selects the previous or next month.[Time]Set the current time.Step 3Click the [Apply] button after setting the date & time.→ The second will be set to "00".[Set time zone]Select your time zone.GMT-12:00 - GMT+13:00Default: GMT-5:00(WJ-NV200K, WJ-NV200VK)GMT(WJ-NV200K/G)Marking the checkbox for [Activate the Daylight saving time]will active daylight saving time.Step 4Click the [Next] button.→ The camera registration window opens.Step 5Register the cameras connected to the recorder.Note:• To use the existing IP address of the connected camer-as, refer to "Detect cameras for registration [Detect cam-eras]" (☞ page 46) instead of this section.The minimum settings required to operate the recorder, such as the date & time, camera registration, recording, can be config-ured on the setup menu - the "Quick setup" menu - "Easy Start".First, configure the minimum settings on "Easy Start", and to configure more advanced settings, go to each setup page.Available settings on "Easy Start"• Date & time of the recorder • Camera registration• Order change of the registered camera numbers • Recording frame rate and image quality* Other settings will remain default or will be conformed to the camera settings.Configure the minimum settings [Easy Start]Step 1Click the [Easy Start] button on the top screen of the setupmenu.Refer to "Basic operations" (☞ page 36) for how to displaythe setup menu.→ The setup menu for the date & time will be displayed.Step 2Set the date & time.
