Panasonic WJ-NV200VK Installation Manual

Also see for WJ-NV200K: Manual Operating instructions Installation guide Operating instructions Quick reference guide

Contents

Panasonic WJ-NV200VK Installation Manual Manual pdf 68 page image

68Configure the settings relating to the mail notification [e-Mail]The settings of alarm mail notice, the settings of error report mail (☞ Operating Instructions (PDF)) and the settings to use the mailfunctions can be configured on this tab.[SMTP server address]Enter an IP address or a name of the SMTP server to sende-mails. The name of the SMTP server is available only when"Manual" is selected for "DNS" on the [Basic] tab accessedfrom the "Advanced setup" menu - the "Network" page ofthe setup menu. Enter up to 255 alphanumeric charactersincluding hyphens (-) and periods (.).[SMTP port number]Enter the port number of the SMTP server.1 - 65535Default: 25[POP server address]Enter an IP address or name of the POP server to be usedfor POP before SMTP authentication. The name of the POPserver is available only when "Manual" is selected for "DNS"on the [Basic] tab accessed from the "Advanced setup"menu - the "Network" page of the setup menu. Enter up to255 alphanumeric characters including hyphens (-) and peri-ods (.).[Authentic method]Select the authentication method to send e-mails from thefollowing.None/ POP before SMTP/ SMTPDefault: None[Authentic method - User name]Enter the user name to be required for the authentication.Enter up to 32 alphanumeric characters excluding "&" listedin the description of "Note".[Authentic method - Password]Enter the password to be required together with the username for the authentication. Enter up to 32 alphanumericcharacters excluding "&" listed in the description of "Note".An entered character for the password will be displayed as"*" or "•".Note:• Available characters are as follows.A B C D E F G H I J K L M N O P Q R S T U V W X Y Z ab c d e f g h i j k l m n o p q r s t u v w x y z 0 1 2 3 4 5 67 8 9 ! # $ % &‘ ( ) * + ,- . / : ; < = > ? @ [ \ ] ^ _ ` { | } ~[Sender's address]Enter the mail address of a sender. Entered mail addresseswill be displayed in the "From" (sender) line. Enter up to 127alphanumeric characters including hyphens (-), periods (.),@, and _.Default: NWDR[Destination address - Address1 - Address4]Enter the mail addresses of the recipients of the alarm mailand the warning mail (☞ Operating Instructions (PDF)). Enterup to 255 alphanumeric characters including hyphens (-),periods (.), @, and _.Check the desired mail type (Warning/Alarm) to be sent.Up to 4 destination addresses can be registered.