Panasonic WJ-RT416 Operating Instructions Manual

Also see for WJRT416 - 16CH DIGITAL RECORDER: Reference Reference Manual Network operating instructions Specifications

Contents

45Setup items Tree view of the recorders and the camerasoperable using the monitoring systemThe names of the recorders and the camera channelswill be displayed. When the icon is clicked, the informa-tion of the respective device will be displayed on theright of the window. Monitor System Info.The name of the monitoring system will be displayed.Edit the name of the monitoring system.Click the [Edit] button, and then edit the name of themonitoring system. To apply the edited name, click the[OK] button. Recorder Info.Adding/deletion of a recorder to/from the monitoringsystem and edit of the recorder information can bemade.Refer to page 14 for how to add a recorder to the moni-toring system.Click the desired recorder icon, and then click the [Edit]button. Edit "IP Address", "Name", "Password" or"Server Port". To apply the edited item, click the [OK]button.Click the desired recorder icon, and then click the[Delete] button. Click the [OK] button on the displayedconfirmation window to delete the recorder from themonitoring system. Camera Info.Edit of the information and the alarm recording durationof the selected camera can be made. Click the desiredcamera icon, and then click the [Edit] button.Edit "Name" (up to 12 characters) or "Rec. Duration".To apply the edited item, click the [OK] button.Images recorded by the alarm recording will be storedthe "Mpeg" folder in the directory selected in the"Choose Directory" section on the "Advanced Setup"window.Important:• The same camera channel name cannot be appliedto two or more camera channels when they are con-nected to the same recorder.• Before editing "Name" of "Camera Info.", make surethat images from the camera channel currently edit-ing are not being displayed.Rec. Duration: Select the recording duration of thealarm recording using this software from among 10 -999 seconds.Alarm images recorded by the alarm recording usingthis software can be saved on the PC. (The alarmrecording starts when the recorder detects an alarmoccurrence.)The default is "30" (sec.).Alarm Recording: Select a camera channel to be usedfor recording when an alarm occurs in the camerachannel respective to the currently selected cameraicon in the tree view on the "Recorder Setup" win-dow.The default is “Off”.Important:• It is impossible to configure/edit the settings of thecurrent login recorder.• The alarm recording will start only when beinglogged in the recorder.• Depending on the timing to start recording images,the first several seconds of the recorded image maynot be played on the RT4Viewer.