Panasonic WJ-RT416 Operating Instructions Manual

Also see for WJRT416 - 16CH DIGITAL RECORDER: Reference Reference Manual Network operating instructions Specifications

Contents

48Setup items Out Sequence Cameras In Sequence CamerasTo not use a specified camera for the sequential dis-play, select the camera not to be used, and then clickthe [<] button. To not use all the cameras for thesequential display, click the [<<] button.To use the camera in the "Out Sequence Cameras" listfor the sequential display, select the camera in the "OutSequence Cameras" list, and then click the [>] button.To use all of the cameras in the "Out SequenceCameras" list for the sequential display, click the [>>]button. Total TimeSet the total time of the sequential display to 0 - 999minutes. When "0" is entered, the sequential display willnot stop until manually stopped.The default is 30 minutes. Dwell TimeSet the dwell time (interval of switching from a camerachannel to the next camera channel) to 15 - 999 sec-onds.The default is 60 seconds. Screen ModeSelect a screen mode to be used for the sequential dis-play from 1, 4, 9 and 16.The default is 4 (4-screen).Map Setup (Monitoring System Config – Map Setup)Set a map (diagram of the camera location arrangement) used for the map display.When remotely operating the recorder, the map offers a visual way of understanding the camera locations.Screenshot 1Select "Map Setup" under "Monitor System Config" fromthe pop-up menu ( page 44).→ The "Map Setup" window will be displayed.Step 1Click the [Insert] button and enter a name in the "Name"box.Then, select the cameras to be displayed on the map.When the checkbox of the recorder name is checked, allof the cameras connected to the recorder will be select-ed.To select independently, select them on the followingwindow to be displayed when the [Detail] button isclicked. After selecting the cameras to be displayed onthe map, click the [OK] button.