Panasonic WJ-SX550A Operating Instructions Manual

Panasonic WJ-SX550A Operating Instructions Manual Manual pdf 17 page image

-14-Note: The desired monitor selection may not be avail-able due to one of the following reasons:1. The System Controller used for selecting a partic-ular monitor is not allowed access to that monitorbecause of keyboard partitioning. See page 20for more details.2. The desired monitor is presently selected byanother operator who has a higher operator priori-ty, and therefore, control over that monitor. At thistime "Monitor Busy" or "NOT AVAILABLE" will bedisplayed on the System Controller's LCD panel.2-2. Camera SelectionThe video signal from the desired camera can be suppliedto the selected monitor by using the System Controller.Press the Numeric keys (1 to 128) then press the CAM keyto select the desired camera.2 34 5 67 8 9MON CAMESC SET01For example: When selecting Camera No.2:Press 2 then press CAM keyNote: The desired camera selection may not be avail-able due to one of the following reasons:1. The operator is not allowed access to the desiredcamera because the Operator Registration haslimited the operator's access to certain cameras.See page 19 for more details.2. The desired camera is currently selected byanother operator who has a higher operator priori-ty, and therefore, control over that camera. At thistime "Camera Busy" will be displayed on theSystem Controller's LCD panel.4. Accessory Control4-1. Iris ControlThis control is used to open or close the iris of specifiedDC servo lens with Panasonic WV-BP510, or WV-CP610series cameras.3. Camera ControlThe selected camera (and, if applicable, the receiver) canbe controlled by the System Controller.Specified Panasonic cameras, such as the WV-BP510, orthe WV-CP610 series, can have various functions con-trolled remotely without the need for a receiver.Note: Because future camera models may have additionalfeatures and functions, please refer to the OperatingInstructions Manual provided with the camera for moredetails.CLOSE OPENIRIS1 2 34 5 67 8 9MON CAMESC SET0ACKRESET BACKSEQ FORWARDSEQ ALTDEC-1CAM INC+1CAM STOP1 2AUXCLOSE OPENIRISPRESETFOCUSNEARZOOMTELEFARWIDESystem Controller WV-CU 550LEFT RIGHTUPDOWNALARM BUSYF3 F4F2F1AAF4-2. Pan/Tilt ControlThis control is used to pan or tilt the pan/tilt head.The following operations are available.1. Manual OperationPress the Joystick Controller to move the Pan/Tilt headtowards the desired direction. Eight directions areavailable: UP / DOWN / RIGHT/LEFT / UP-RIGHT / UP-LEFT / DOWN-RIGHT / DOWN-LEFT.2. Auto Panning OperationIt is necessary to use a Pan/Tilt head such as the WV-7225.3. Random Panning OperationIt is also necessary to use a Pan/Tilt head which hasthe auto panning capability such as the WV-7225.4-3. Auxiliary (AUX) ControlThis control is used to turn on or off the user’s auxiliaryswitches located in the Receiver, such as the WV-RC100,WV-RC150 or WV-RC170 Receivers.2