Panasonic WJNT304 - NETWORK INTERFACE UNIT Network Operating Instructions

Also see for i-pro WJ-NT304: Product catalog Integration note Specification sheet Operating instructions Brochure

Contents

Panasonic WJNT304 - NETWORK INTERFACE UNIT Network Operating Instructions Manual pdf 39 page image

39Configure the settings of the servers [Server setup]The settings relating to the mail server and the FTP server can be configured on this page.The "Server setup" page has 2 tabs of the [Mail] tab and the [FTP] tab.Configure the settings relating to the mail server [Mail]Click the [Mail] tab on the "Server setup" page.The settings relating to the mail server used to send the alarm mail can be configured on this page.[SMTP server address]*Enter the IP address or the host name of the SMTPserver used to send e-mails.Number of characters that can be entered: 1 - 128charactersDefault setting: Blank[POP server address]*When "POP before SMTP" is selected for"Authentication", enter the IP address or the host nameof the POP server.Number of characters that can be entered: 1 - 128charactersDefault setting: BlankImportant:When entering the host name for "NTP serveraddress", it is necessary to configure the DNS set-tings on the [Network] tab of the "Network setup"page. ( page 42)[Authentication]Select the authentication method to send e-mails fromthe following.None: It is not necessary to clear any authentication tosend e-mails.POP before SMTP: It is necessary to clear the POPserver authentication first to use the SMTP server tosend e-mails.SMTP: It is necessary to clear the SMTP server authen-tication to send e-mails.Default setting: NoneNote:When you don’t know the authentication method tosend e-mails, refer to the network administrator.[User name]Enter the user name to access the server.Number of characters that can be entered: 1 - 32charactersDefault setting: Blank[Password]Enter the password to access the server.Number of characters that can be entered: 0 - 32charactersDefault setting: Blank[Sender mail address]Enter the mail address of a sender.Entered mail address will be displayed in the "From"(sender) line of the sent mails.Number of characters that can be entered: 3 - 128characters