Panasonic WJNT304 - NETWORK INTERFACE UNIT Network Operating Instructions

Also see for i-pro WJ-NT304: Product catalog Integration note Specification sheet Operating instructions Brochure

Contents

Panasonic WJNT304 - NETWORK INTERFACE UNIT Network Operating Instructions Manual pdf 4 page image

4Monitor Images on a PCThe following are descriptions of how to monitor images from the unit on a PC.Monitor images from a single cameraentries. The default user name and password are asfollows.User name: adminPassword: 12345When accessing the unit without changing thedefault password, the pop-up window saying that itis recommended to change the password will be dis-played.To enhance the security, change the password forthe user "admin". It is recommended to change thispassword periodically. ( page 37)• When "Unicast port (AUTO)" or "Unicast port (MAN-UAL)" is selected for "Transmission type" ( page25), up to 8 users per channel (up to 16 users for thetotal of all the channels) can access the unit concur-rently. Depending on the set values for "Total bitrate" and "Max bit rate (per 1 client)", the maximumconcurrent access number may be limited. When 8users have been concurrently accessing already, theaccess limit message will be displayed for users whoaccessed subsequently.• When "ON" is selected for "MPEG-4 transmission"( page 25), an MPEG-4 image will be displayed.When "OFF" is selected, a JPEG image will be dis-played. It is possible to display JPEG image evenwhen "ON" is selected for "MPEG-4 transmission".In this case, the refresh interval will be lowered toapprox. half the set value.When "ON" is selected for "MPEG-4 transmission"JPEG (VGA): 15 fpsJPEG (QVGA): 60 fpsThese are the total maximum values of all the chan-nels.The refresh interval may be longer depending on anetwork environment, PC spec, photographic sub-ject, access traffic, etc.Important:When displaying multiple MPEG-4 images on a PC,images may not be displayed depending on the per-formance of the PC.Refer to the next page for further information about the"Live" page.Step 1Start up the web browser.Step 2Enter the IP address designated using the Panasonic IPsetup software in the address box of the browser.(Example: http://192.168.0.10/)Important:• When the HTTP port number is changed from "80",enter "http://IP address of the unit +: (colon) + portnumber" in the address box of the browser, forexample, "http://192.168.0.11:8080".• When the PC is in a local network, configure theweb browser to bypass the proxy server for the localaddress.Step 3Press the [Enter] key on the keyboard.→ The "Live" page will be displayed.Important:Follow the instructions on page 58 when the mes-sage is displayed on the information bar of thebrowser.Notes:• When "ON" is selected for "User Authentication", theauthentication window will be displayed before dis-playing live images for the user name and password