Basic Transmission Settings22The Original setting is useful when sending photographs or illustrations with gray tones. Your machine ispreset to "TEXT". You can select either "TEXT/PHOTO" or "PHOTO" mode.NOTE 1. When you select TEXT/PHOTO, or PHOTO, you machine will automatically select FineResolution.2. When you store a document in memory, the Verification Stamp will stamp on the document if itis successfully stored in memory. In this case the Verification Stamp is not a confirmation thatthe document was successfully transmitted. If you wish to disable the use of the VerificationStamp when storing document in memory, change the setting of Fax Parameter No. 28. (Seepage 193)3. To change the preset Verification or File Format position, change the setting of Fax ParameterNo. 04 or 177. (See page192,197)Original (Text/Photo)OthersSending 2-Sided Original(s)2-Sided scanning selection control is available for the user depending on the originallayout. The following selections are available for the 2-Sided scanning option:• Long Edge : 2-Sided scanning aligned to the long edge of the original.• Short Edge: 2-Sided scanning aligned to the short edge of the original.Verification Stamp• Confirms successful transmissions by stamping the bottom of each successfullytransmitted page with a small mark.You or a selected party can be notified with a Job Completion Notice via a pop upscreen on your/their PC when the Copy Job or the Print Job is completed. You mustsetup the Job Completion Notice feature prior to starting the job and properly setup theStatus Monitor.Confirms the commication status.Retrieving the Email temporarily.Chenge the send file format temporarily when sending an Internet Fax.(DP-2310/3010 only)TEXTTEXT/PHOTOPHOTOfor text only originalsfor text and photo originalsfor photo or illustration originals2-SIDEDORIGINALX-STAMPCOMPLETIONNOTICECOMM. STATUSGET EMAILFILE FORMAT
