Panasonic WV-ASC970 Operating Instructions Manual

Also see for WV-ASC970: Operation guide Operating instructions

Contents

Panasonic WV-ASC970 Operating Instructions Manual Manual pdf 41 page image

41■ Lens ControlNote:• Check that a specified lens, with motorized zoom/focus functions, is mounted on the camera, andthe lens selection (DC/VIDEO) on the camera is setto DC.• Available functions differ depending on cameras.Refer to the Operating Instructions of camera.1. Select the desired monitor and camera. (Refer top. 39 Monitor Selection and Camera Selection.)2. Press the FOCUS FAR or NEAR button whilewatching the monitor. The lens focus is adjusted toobtain a sharply focused image.Note:• Pressing the B button or top button of 3D joystickunit can also set the lens focus automatically.3. To adjust the lens zoom, move the zoom wheelcontroller to the right (TELE) or left (WIDE).4. Press the IRIS OPEN or CLOSE buttons to open/close the lens iris. The lens iris is adjusted by thesebuttons to obtain the proper image exposure.Note:• To return the lens iris to the factory default status,press the A button of 3D joystick unit.■ Pan/Tilt Control● Manual Operation1. Select the desired monitor and camera. (Refer top. 39 Monitor Selection and Camera Selection.)2. Move the 3D joystick to move the pan/tilt headtowards the desired direction.Note:• If you move the 3D joystick widely, you can panand tilt the camera faster.• Panning/tilting speed differs depending on camer-as.● Auto PanningRefer to p. 54 Auto Mode for how to operate.● Program Preset Position1. Select the desired monitor and camera. (Refer top. 39 Monitor Selection and Camera Selection.)FARFOCUSNEARBTop buttonWIDE TELEZoom wheel controllerOPENIRISCLOSEACamera Site Accessories Control