Panasonic WV-ASC970 Operating Instructions Manual

Also see for WV-ASC970: Operation guide Operating instructions

Contents

Panasonic WV-ASC970 Operating Instructions Manual Manual pdf 8 page image

8Main FeaturesImportant:• To control the EBL512, it is necessary to register the license for the Extension Software WV-ASE901 (option)additionally.■ Operator Functions● Operator Area ChangesThe system can be divided into multiple areas (up to 64), and an operator can change from one area to another ifthey have the necessary permission.● Operator Log On and OffEach system operator is assigned a user ID and password in the Admin Console. A user ID and password arerequired for any operators to log on to the system. System administrators can decide to automatically log operatorsoff if there is no activity for a pre-defined time period.Note:• WV-ASM970 can use alphanumeric characters to logon. This is registered by WV-ASC970 Admin Console.● Operator ClassThe system allows administrators to define operator classes (up to 16) with up to 35 different privileges for bothlocal and global operators.● Operator PriorityThe system administrator can assign a priority to each operator. When two operators compete for system resourc-es, only the operator with the higher priority gets the resources. Refer to the Priority Rules section for more details.■ Global Video Switch and Video RoutingThis function allows operators to switch video from one video source to another, if the permission is granted. Formultiple operators competing for the same resource, it only allows the highest priority operator to perform this func-tion. The next highest priority operator gains control when the highest priority operator releases the resource. Hereis a sample operation to switch video from local camera number 1 in domain 1, to another camera number 1 indomain 2, on a local monitor number 1.1. Login to System Controller: Enter 500 for ID and enter 500 for password (Global Operator).2. Select monitor 1: Enter 1 and press MONITOR key.3. Select local camera 1: Enter 1 and press CAMERA key.4. Select global camera 1 (Unit2's camera 1): Enter 200001 and press CAMERA key.Note:• Format: Unit (Domain) id (2) + Camera number (1). E.g. 200001 (Unit 2, Camera 1)(Note that first entry digit must be non-zero, and must not exceed eight digits).• Only Global Operator can access foreign domain resources.