Panasonic WV-BS300 Operating Instruction

Contents

Panasonic WV-BS300 Operating Instruction Manual pdf 11 page image

- 8 -(6) Synchronization (SYNC)Important Notice:The priority of sync mode is as follows:1. Multiplexed Vertical Drive (VD2) (Highest)2. Line-lock (LL)3. Internal Sync (INT) (Lowest)Note:The automatic sync mode selection is made according to priority listed above. Refer to"Synchronization Setting" on page 12 for detailed procedures.(7) Special Menu (SPECIAL)Aperture level, and pedestal level can be adjusted. Your settings canbe released to return to the default settings.See page 15 for the settings.* SPECIAL *AP GAIN ....I....PEDESTAL .I.......− +CAMERA RESET →PUSH SWRET(8) Automatic Panning (AUTO PAN)Select one of the two panning modes below:OFF : Operates the panning manually.AUTO PAN : Operates the panning automatically with the presetpanning range.** SET UP **CAMERA ID OFF *ALC/MANUAL ALC *SHUTTER OFFAGC ONSYNC INTAUTO PAN OFFSPECIAL *n MENU DISPLAYl Setup Menu Display1. Select the desired camera number to set up and a monitor to displaythe setup menu.2. Display the D4 menu by using the cursor.3. Press the F1 button.The setup menu appears on the monitor.4. To close the setup menu, press the F4 button.D4 menun Setting ProceduresThe following setting procedures are described on the assumption that this model is used in combination withthe WJ-SX550A Matrix Switcher and WV-CU550A System Controller. If this model is used with WV-RM70System Controller, refer to "In Case of WV-RM70" on page 5 for operation.F1 F2 F3 F4Camera Set up menuRes A.Res EXITF2 F3 F4Camera Set up menuOn EXITF1