Panasonic WV-BS300 Operating Instruction

Contents

Panasonic WV-BS300 Operating Instruction Manual pdf 12 page image

- 9 -l Submenu DisplayThe items having ∗ mark enable to edit the submenu.• Move the cursor to an item having ∗ mark and press the CAM (SET)button.The submenu is displayed.Camera ID setting menuABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789().,'":;&#!?=+−*/%$ÄÜÖÆÑÅ← → SPACEPOSI RET RESETWV-BS300.......Setup menuABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789().,'":;&#!?=+−*/%$ÄÜÖÆÑÅ← → SPACEPOSI RET RESETWV-BS300.......ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789().,'":;&#!?=+−*/%$ÄÜÖÆÑÅ← → SPACEPOSI RET RESETWV-BS300.......n CAMERA SETTING1. Camera Identification (CAMERA ID) Setting• Move the cursor to "CAMERA ID" and select either "ON" (Cameraidentification characters are displayed) or "OFF" mode by using thejoystick.• When the camera identification character needs editing, perform thefollowing steps by using the submenu of camera identification.• Move the cursor to "CAMERA ID" and press the CAM (SET) button todisplay the character editing menu.• The character cursor on the letter "A" and the editing cursor on the leftend of the editing area starts blinking.• Move the character cursor to the desired letter by using the joystickand then press the CAM (SET) button. The selected letter is written tothe editing cursor position. (The blinking editing cursor moves to theright automatically at this moment.)• Repeat the above procedure until all character editing is completed.• When the position of the editing cursor is to be shifted in the editingarea, move the character cursor to "←" or "→" and press the CAM(SET) button. This function is used to move the editing position or tocorrect an individual character.• When a blank space is needed, move the character cursor to the"SPACE" position and press the CAM (SET) button. The blank spaceis inserted into the cursor position in the editing area.• When all characters in the editing area are to be erased, move thecharacter cursor to "RESET" and press the CAM (SET) button.• After completing the editing of the camera Identification characters,the display position of the camera identification characters on themonitor screen can be set as follows.• Move the character cursor to "POSI" and press the CAM (SET) buttonto display the ID position menu. The characters of the camera ID startblinking to identify the selection of the positioning menu.ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789().,'":;&#!?=+−*/%$ÄÜÖÆÑÅ← → SPACEPOSI RET RESETWV-BS300.......** SET UP **CAMERA ID OFF *ALC/MANUAL ALC *SHUTTER OFFAGC ONSYNC INTAUTO PAN OFFSPECIAL *Setup menu