- 21 -* ALC CONT *BACK LIGHT COMPPRESET OFFMASK SET *LEVEL ....I....− +RET• If you want to change the video output level (picture contrast), movethe cursor to LEVEL and use the joystick to adjust the iris of the ALClens. When you move the cursor to the right (+) with the joystick, thelens iris opens wider to raise the level of video output. If you move thecursor to the left (−), the reverse effect is obtained.• Move the cursor to RET by using the joystick and press the CAM(SET) key to return to SET UP.* ALC CONT *BACK LIGHT COMPPRESET OFFMASK SET *LEVEL ....I....− +RET(3) MANUAL Mode• Move the cursor to ALC/MANUAL and select MANUAL by using thejoystick.• Press the CAM (SET) key so that the manual setting menu appears.Control the level by using the joystick.• Move the cursor to RET by using the joystick and press the CAM(SET) key to return to SET UP.* MANUAL CONT *IRIS ....I....CLOSE OPENRETManual setting menu** SET UP **CAMERA ID OFF *ALC/MANUAL ALC *SHUTTER OFFAGC ONSENS UP OFFSYNC INTWHITE BAL ATW *WIDE D-RANGE OFFMOTION DET OFFAF MODE MANUAL*RET SPECIAL *Camera setting menu4. Shutter Speed Setting (SHUTTER)• Display SET UP on the monitor screen.If necessary, refer to Setup Menu Display for details on displaying theSET UP menu on the monitor screen.• Move the cursor to SHUTTER and select the electronic shutter speedby using the joystick.The electronic shutter speed changes as follows by operating thejoystick:OFF (1/50) 1/1201/10000 1/4000 1/2000 1/10001/250 1/500