Panasonic WV-CF250 Operating Instructions Manual

Contents

Panasonic WV-CF250 Operating Instructions Manual Manual pdf 14 page image

1. CAMERA SETUP MENUThis camera utilizes a user setup menu that is displayed on-screen.The setup menu contains various items that form a tree-type structure as shown below.It is described in the following section : “2. SETUP OPERATION.”-12-CAM SET UPCameraIDON/OFFCameraIDEditingSUPER-DONCamera IDDisplayPositionManualLevelSelectionSUPER-DOFFLightControlALC ELCManualMask AreaSelectionManualLevelSelectionINTManualSelectionShutterSpeedAGCON/OFFManualMask AreaSelectionV. PhaseManualAdjustmentSYNCINT/LLLLManualSelectionVD2AutomaticSelectionSET UP DISABLE → SET UP ENABLE →SETUPLeft ButtonSet SwitchRight ButtonDown ButtonUp Button(U) (Up Button):This button is used to move the cursorupwards. Use this button to select an itemor adjust the parameters.(D) (Down Button):This button is used to move the cursordownwards. Use this button to select anitem or adjust the parameters.(R) (Right Button):This button is used to move the cursor tothe right. Use this button to select or adjustthe parameters of the selected item. Theparameter changes each time this button ispressed.(L) (Left Button):This button is used to move the cursor tothe left. Use this button to select or adjustthe parameters of the selected item. Theparameter changes each time this button ispressed.(S) (Set Button):This button is used to set the determinedparameter. If the item has its own settingmenu (as indicated by ), press this but-ton to display the setting menu.• All Reset OperationAll Reset allows you to reset all setup menu itemsto the factory settings if you are unsure about thecorrect settings. Proceed as follows:(1) Make sure that the CAM SET UP menu is notdisplayed (a camera picture is displayed).(2) While pressing both (L) and (R), press(S) for a few seconds. The words ALLRESET momentarily appear on the monitor.At this time all adjustments and parameters arereset to the factory default settings.2. SETUP OPERATIONThis camera utilizes a user setup menu (CAM SETUP) that is displayed on the monitor.To set items on the CAM SET UP menu, use the fol-lowing buttons on the side panel.