-22-See the pages below for the settings respectively.Shutter speed: page 36AGC: page 36Electronic sensitivity enhancement: page 36White balance: page 38Motion detector: page 39Auto focus: page 40 Preset Speed Setting (PRESETSPEED)Move the cursor to PRESET SPEED and select aspeed with the joystick. To Return to the Preset Number SetMenuMove the cursor to RET and press the CAM (SET)key. The PRESET NUMBER SET menu appears withthe * mark on the right of the preset positionnumber. To Return to the Setup MenuMove the cursor to RET and press the CAM (SET)key. Deleting Preset Positions1. Move the cursor to PRESET 1 and select theposition number to be deleted with the joystick.2. Press the CAM (SET) key to display the presetsetting menu.3. Move the cursor to DEL and press the CAM (SET)key.This deletes the preset position and the PRESETNUMBER SET menu appears. The * mark on theright of the number disappears.Note: Your selected preset number is cancelledonly in the SEQ and SORT mode. The previouslyset parameters (for PAN, TILT positions, etc.)are not changed. If you want to change theseparameters, you must set them again.PRESET NO. 1*POSITION SETPRESET IDALC/MANUALDWELL TIMESCENE FILEPRESET SPEEDRET DELONALC10S1••••••••|L HPRESET NO. 1*POSITION SETPRESET IDALC/MANUALDWELL TIMESCENE FILEPRESET SPEEDRET DELONALC10S1••••••••|L H** PRESET NUMBER SET **261014182226301*591317212529ID:DOOR33-64 RET3711151923273148121620242832** SET UP MENU **PRESET 1MAPHOME POSITIONSELF RETURNAUTO MODEAUTO PAN KEYDIGITAL FLIPSPECIAL1CAMERARS485 SET UPPASSWORD LOCK OFFOFFOFFOFFAUTO PANONPRESET NO. 1*POSITION SETPRESET IDALC/MANUALDWELL TIMESCENE FILEPRESET SPEEDRET DELONALC10S1••••••••|L H** PRESET NUMBER SET **261014182226301*591317212529ID:DOOR33-64 RET3711151923273148121620242832