-23- Home Position Setting (HOMEPOSITION)1. To set a position number for the home positionMove the cursor to HOME POSITION and select adesired position number with the joystick.2. Select OFF if you are not using the home positionfunction. Self Return Setting (SELFRETURN)You can set a return time and one of operation modeswith this menu.1. Move the cursor to SELF RETURN, select a returntime from among the following with the joystick andpress the CAM (SET) key to confirm your selection.MIN stands for minute(s).2. Select an operation from among the following withthe joystick and press the CAM (SET) key to confirmyour selection. Auto Mode Selection (AUTOMODE)1. To set auto modeMove the cursor to AUTO MODE and select a modewith the joystick. Modes change as follows:2. When AUTO PAN is selected, set details as follows:Move the cursor to AUTO PAN O and press theCAM (SET) key to display the AUTO PAN settingmenu.3. To set a panning starting point and panningendpointFollow the steps below.(1) Move the cursor to POSITION and press theCAM (SET) key. The cursor moves to START.(2) Move the joystick to select a panning startingpoint and press the CAM (SET) key.** SET UP MENU **PRESET 1MAPHOME POSITIONSELF RETURNAUTO MODEAUTO PAN KEYDIGITAL FLIPSPECIAL1CAMERARS485 SET UPPASSWORD LOCK OFF15OFFOFFAUTO PANON** SET UP MENU **PRESET 1MAPHOME POSITIONSELF RETURNAUTO MODEAUTO PAN KEYDIGITAL FLIPSPECIAL1CAMERARS485 SET UPPASSWORD LOCK OFF1OFFOFFAUTO PANON2MIN 3MIN 5MIN 10MIN60MIN 30MIN 20MIN1MINOFF** SET UP MENU **PRESET 1MAPHOME POSITIONSELF RETURNAUTO MODEAUTO PAN KEYDIGITAL FLIPSPECIAL1CAMERARS485 SET UPPASSWORD LOCK OFFOFFOFFAUTO PANAUTO PANONOFF SEQ SORT AUTO PAN PATROL** AUTO PAN **POSITIONSPEEDENDLESSDWELL TIMEPAN LIMITZOOM LIMITRETSTARTEND••••|••••L HOFF1SOFFOFF** AUTO PAN **POSITIONSPEEDENDLESSDWELL TIMEPAN LIMITZOOM LIMITRETSTARTEND••••|••••L HOFF1SOFFOFF** SET UP MENU **PRESET 1MAPHOME POSITIONSELF RETURNAUTO MODEAUTO PAN KEYDIGITAL FLIPSPECIAL1CAMERARS485 SET UPPASSWORD LOCK OFF110MIN ATOFFAUTO PANONAT HP AP SQSROFFPT

operating instructions

important safety instructions

PREFACE

I Camera Cleaning

CONSTRUCTION

SETUP

I Setup Menu Description

rs485 communication

SETTING PROCEDURES

I Preset Menu

I Deleting Preset Positions

I Home Position Setting (HOME POSITION)

I Auto Pan Key Setting (AUTO PAN KEY)

I Special 1 Menu Setting (SPECIAL 1)

I Camera Setting

I RS485 Setup

factory default setting

INSTALLATION

CONNECTIONS

SYSTEM CONNECTIONS

SPECIFICATIONS

ACCESSORIES

APPENDIX

Panasonic WV-CS854B Operating Instructions Manual

Super Dynamic II WV-CS854B

specifications