Panasonic WV-CW384E Operating Instructions Manual

Also see for Super Dynamic III WV-CW380: Brochure & specs Brochure & specs

Contents

Panasonic WV-CW384E Operating Instructions Manual Manual pdf 23 page image

23Setting ProceduresFirst, select a language for menu display and camera ID display.Language Setup (LANGUAGE SETUP)1. Select "LANGUAGE" on the top menu and press the [SET] button.→ The "LANGUAGE SETUP" menu opens.2. Select a language. The default setting is "ENGLISH".Available languages: ENGLISH, FRANÇAIS, ESPAÑOL,DEUTSCH, ITALIANO, êìëëäàâ, CHINESE or JAPANESE3. Select "SET" on the menu and press the [SET] button.1. On the "CAMERA SETUP" menu, select "ONO" or "OFFO" for"CAMERA ID" and press the [SET] button.ONO: Displays entered camera ID.OFFO: Does not display the ID.→ The "CAMERA ID" menu opens.2. Select a character from the character area and press the [SET]button.→ The selected characters are displayed in the editing area.1. Camera Identification Setting (CAMERA ID)Assign a name to the camera using up to 16 characters to display it overlaying on the camera picture in the selected position.Note:• If you change the language selection after the assignment of camera ID, it will be erased.**CAMERA SETUP** 1/2CAMERA ID OFFOALC ALCOSHUTTER OFFAGC ON(HIGH)SENS UP OFFSYNC INTWHITE BAL ATW1OMOTION DET MODE1ODNR HIGHRESOLUTION HIGHBW MODEO**LANGUAGE SETUP**LANGUAGE ENGLISHSETRET TOP END3. Repeat these procedures until all characters are entered.• To enter a blank space, select "SPACE" and press the [SET]button.• To replace a specific character in the editing area:1. Move the cursor to the editing area and then move thepointer to the character to be replaced pressing the[LEFT] and [RIGHT] buttons.2. Move the cursor to a candidate character in the characterarea and press the [SET] button.• To erase all characters of the camera ID, select "RESET" andpress the [SET] button.Note:• For Chinese language, up to 8 characters can be entered.CAMERA ID0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ().,'":;&#!?=+-*/%$SPACE POSIRET TOP END RESET················CharacterCursorPointerCharacterAreaCommandEditingAreaFLOOR 1 Highlighted