Panasonic WV-CW384E Operating Instructions Manual

Also see for Super Dynamic III WV-CW380: Brochure & specs Brochure & specs

Contents

Panasonic WV-CW384E Operating Instructions Manual Manual pdf 6 page image

6PrefacePanasonic's WV-CW384 and WV-CW380 cameras introduce high picture quality by use of Super-Dynamic 1/3-inch type {1/3"}CCD and digital signal processing LSIs. These cameras are designed for installation on the wall or the ceilling, using the sup-plied camera mount bracket.FeaturesIntroduction of SUPER-D3 (super dynamic function)Integration of SUPER-D3 into the CCD and signal processing circuit has achieved approximately 160 times higher dynamicrange as compared with conventional camera. Therefore, a photographic subject on which much illuminance difference existsresulting from bright and dark areas can be naturally displayed in an image.Auto back focus function (ABF) equippedThe back focus adjustment can be performed through the operation buttons on this unit and the setup menu.The back focus can be remotely adjusted through the system controller (option) even after installation of this unit. The autoback focus function also allows users to correct out of focus when changing between color and black-and-white images.High sensitivity achieved thanks to noise reduction functionThe introduction of low noise circuit design has achieved excellently high sensitivity resulting in the minimum illuminance of0.65 lx in the color mode and 0.09 lx in the black-and-white mode.Night monochrome image activation function equippedNo operation is required at night because the image automatically changes from the color mode to the black-and-white modeat low illuminance.Motion detector function equippedIf motion is observed in the monitor, the camera is covered with a cloth, a cap, or the like, or the camera direction is changedduring monitoring, an alarm signal is provided.