424. Select a mode for C/L ↔ B/W. The default setting is AUTO.AUTO: Adjusts the back-focus automatically every time the camera switches the modebetween color and black-and-white. AUTO is usable only when OFF, X2 AUTO, or X2FIX is selected for SENS UP.PRESET: Adjusts the back-focus to the positions for color mode and black-and-whitemode that are preset by performing step 2 (automatic) or step 3 (manual) under therespective light conditions.FIX: Fixes the back-focus after adjustment.5. Select ON or OFF for SETUP-SW LOCK. The default setting is OFF.OFF: Enables the [SET] button to open the back-focus adjustment screen while the camerapicture is displayed.ON: Disables the [SET] button from opening the back-focus adjustment screen.6. To reset the back-focus to the default setting, press the [LEFT] and [RIGHT] buttons simul-taneously.Notes:• Select FIX or PRESET and adjust manually the back-focus when automatic adjustmentis hindered by the following conditions.1. Dirt or a water drip attached to window glassThis causes defocus on the object beyond the glass.2. Objects in low lighting conditions3. Objects extremely bright4. Flat contrast objects such as white wall or fine felt5. Objects placed on the outskirts of the scene6. More than one object placed with a certain depth7. An object having a certain depth8. Objects continuously moving such as busy streets9. Objects extremely flickering10. Objects consisting of parallel horizontal lines such as a window shade• Matsushita Electric Industrial Co., Ltd shall not be responsible for any inconvenience,damage or loss caused by or attribute to inappropriate settings for the ABF function.18. Special Menu (SPECIAL SETUP)Select SPECIAL on the top menu and press the[SET] button.→ The SPECIAL SETUP menu opens.18-1. Chroma Level Setting (CHROMAGAIN)Move the "I" cursor to adjust the chroma level.**SPECIAL SETUP**CHROMA GAIN ...I..128AP GAIN ...I..128PEDESTAL ...I..128HUE ...I..128– +PIX OFFCAMERA RESET →PUSH SWSER.NO. XXXXXXXXRET TOP END↵