Panasonic WV-CZ362E Operating Instructions Manual

Contents

18Special Setting1 Chroma Level (CHROMA GAIN)2 Aperture Level (AP GAIN)3 Pedestal Level (PEDESTAL)Move the cursor to CHROMA GAIN, AP GAIN and PEDESTAL and move the “I” cursor toyour desired position.4 PIX OFF Setting (PIX OFF)In this setting, you can assign a blemish position and compensate the blemish.1. Move the cursor to PIX OFF and press the setting button. The PIX OFF menu appears.2. Select a number and press the setting button. The blemish compensation positionsetting screen appears.Move the “+” cursor to the place on the blemish position. After moving the “+” cursor to aposition where the blemish looks inconspicuous, press the setting button. Consequently,the blemish compensation position is set up and the PIX OFF menu is restored.After a blemish compensation position is set up, “*” is attached at the right of the number.3. If you would like to delete a blemish compensation position, move the cursor tothe applicable number and press the setting button.The blemish compensation position setting screen appears.The blemish compensation position is deleted and “*” is also deleted from the rightof the number by pressing the RIGHT and LEFT buttons for more than 2 seconds.** SPECIAL SETUP **CHROMA GAIN ••••|••••AP GAIN ••••|••••PEDESTAL ••••|••••- +PIX OFFZOOM INVERSE OFFFOCUS INVERSE OFFREFRESH PUSH SETCAMERA RESET PUSH SETRET TOP ENDqwert yui** PIX OFF **1* 2* 3* 4*5* 6* 7* 8000 000RET TOP END+