Panasonic WV-CZ362E Operating Instructions Manual

Contents

8To determine the display position of the CAMERA ID1. Move the cursor to POSI, and press the setting button.The display in the figure appears and the CAMERA ID is highlighted.2. Move the CAMERA ID to the desired position.3. Press the setting button to fix the position of the CAMERA ID.WV-CZ3622 Light Control Setting (ALC/MANUAL)1. Move the cursor to ALC/MANUAL and select ALC or MANUAL. When you select ALC,backlight compensation ON or OFF can be set.Note: The backlight compensation submenu associated with this menu is describedseparately and should be set up after installing the camera at the site and observ-ing the actual site picture.2. When MANUAL is selected, quit the setup menu. Press the OPEN or CLOSE button onthe controller for iris adjustment.Note: The camera menu cannot be used for iris control.(1) ALC Mode with BLC ON1. Press the setting button after selecting ALC. The ALC CONT menu appears.2. Move the cursor to the BLC parameter and select ON.3. If you want to adjust the video output level, adjust the “I” cursor for LEVEL.** ALC CONT **BACK LIGHT COMPBLCMASK SETLEVELRET TOP ENDOFF••••|••••- +** ALC CONT **BACK LIGHT COMPBLCLEVELRET TOP ENDON••••|••••- +