Panasonic WV-LW1900 Operating Instructions Manual

Also see for WV-LW1900: Product catalog Specifications Operating instructions Specifications

Panasonic WV-LW1900 Operating Instructions Manual Manual pdf 6 page image

6PrefaceThis is a video monitor provided with a 19"-type (V) (WV-LW1900) or a 22"-type (V) (WV-LW2200) LCD panel.• Built-in full high-definition panel (for WV-LW2200)/high-definition panel (for WV-LW1900) with high-speedresponse• Supporting HDMI, composite video signal and analogRGB signal for personal computer (PC)• HDMI, video (480p/720p/1080i/1080p) and audio(1 ch) supported• Composite video, automatically switchable betweenNTSC and PAL system• PC display capacity supporting resolutions from VGA(640 x 480) to SXGA (1280 x 1024). Picture display posi-tion can be automatically adjusted.• Audio input x1 and built-in speaker with max. output of0.5 W• On-screen setup menu• Auto-volt power supply from 100 V AC to 240 V AC* The supplied power cord shall be used exclusively forthis monitor. To use this product with different powersource, replace the power cord• The screw holes for wall mounting at the rear of thismonitor comply with the VESA (Video ElectronicsStandards Association) standards (100 mm pitch).* VESA: Video Electronics Standards AssociationTrademarks and registered trademarksHDMI, the HDMI logo and High-Definition MultimediaInterface are trademarks or registered trademarks of HDMILicensing LLC.Precautions• Refer all work related to the installation of this prod-uct to qualified service personnel or systeminstallers.• Do not block the ventilation opening or slots on thecover.• Do not drop metallic parts through slots.This could permanently damage the apparatus. Turn thepower off immediately and contact qualified service per-sonnel for service.• Do not attempt to disassemble this product.To prevent electric shock, do not remove screws or cov-ers.There are no user-serviceable parts inside. Contactqualified service personnel for maintenance.• Do not strike or give a strong shock to this product.It may cause damage or allow water to enter this prod-uct.• Do not expose this product to water or moisture.Do not try to operate it in wet areas.Take immediate action if this product gets wet. Turn thepower off and refer servicing to qualified service person-nel. Moisture can damage this product and also causeelectric shocks.• CleaningTurn the power off when cleaning the unit. Otherwise itmay cause injuries.Do not use strong or abrasive detergents when cleaningthis product body.Use a dry cloth to clean this product when it is dirty.When the dirt is hard to remove, use a mild detergentand wipe gently.• Do not operate this product beyond its specifiedtemperature, humidity, or power source ratings.Use this product under conditions where temperaturesare between 0 °C and + 40 °C, and humidity below90 %.