Panasonic WV-NP1004 Network Operating Instructions

Also see for WVNP1000 - NETWORK CAMERA: Integration note Operating instructions Manual Operating instructions

Contents

Panasonic WV-NP1004 Network Operating Instructions Manual pdf 30 page image

30Configure the alarm settings [Alarm setup]The settings relating to alarm occurrences such as settings for the alarm action at an alarm occurrence, the alarmoccurrence notification, and the VMD area settings can be configured on this page.The "Alarm setup" page has 3 tabs of the [Alarm] tab, the [VMD area] tab and the [Notification] tab.Configure the settings relating to the alarm action [Alarm]Click the [Alarm] tab on the "Alarm setup" page.The settings relating to the alarm action can be configured on this page. Refer to pages 31 and 32 for further infor-mation about the settings relating to the alarm image and the alarm out connector.[Terminal alarm]Select "ON" or "OFF" to determine whether or not toreceive the terminal alarm.Default: OFF[VMD alarm]Select "ON" or "OFF" to determine whether or not toperform the alarm action using the VMD function. Referto page 33 for further information about the VMD areasettings.Default: OFF[Command alarm]Select "ON" or "OFF" to determine whether or not toreceive the command alarm.The command alarm is the function that notifies ofPanasonic protocol alarm from the other cameras.When "ON" is selected, alarm actions will be performedbetween multiple cameras.Default: OFF[Originating port number]Select a port number to be used to receive the com-mand alarm.Available port number: 1 - 65535Default: 8181[Scene change detection alarm]Select "ON" or "OFF" to determine whether or not toperform the alarm action when the camera lens is cov-ered by something such as a cloth, or when the shoot-ing direction of the camera is moved.Default: OFF[Level setup]Select the sensitivity of the scene change detectionalarm function from the following.Level 1/Level 2/Level 3Default: Level 1