Panasonic WV-NS202 Network Operating Instructions

Also see for WV-NS202 - i-Pro Network Camera: Integration note Network operating instructions Instructions

Contents

47Configure the settings relating to the alarm out connectorClick the [Alarm] tab on the "Alarm setup" page. ( page 15) Alarm output terminal setupThe settings relating to the alarm out connector can be configured in this section. The settings for the alarm outputterminal can be configured only when "Alarm output" is selected for "Terminal alarm 2" of "Alarm setup". Refer topages 43, 44 and 46 for further information about the settings relating to the alarm, the camera action at an alarmoccurrence and the alarm image.[Alarm output setup]Select "ON" or "OFF" to determine whether or not tooutput the alarm signals to the alarm output terminalwhen an alarm is detected.Default: OFF[External terminal output setup]Select "Latch" or "Pulse" for the alarm output terminal atan alarm occurrence.Latch: When an alarm is detected, the alarm output ter-minal will be in the state selected for "Alarm output"until the alarm occurrence indication button isclicked.Pulse: When an alarm is detected, the alarm output ter-minal will be in the state to the "Alarm output" settingfor the period set for "Pulse width".Default: Latch[Alarm output]Select "Open" or "Close" to determine whether to openor close the alarm output terminal when outputting thealarm signals.OPEN: The alarm output terminal will open when out-putting the alarm signals. (Normally close)CLOSE: The alarm output terminal will close when out-putting the alarm signals. (Normally open)Default: OPENNote:When "OPEN" is selected, the alarm signal will beoutput for around 20 seconds when the power of thecamera is turned on.[Pulse width]When "Pulse" is selected for "Alarm output", select analarm output terminal duration from the following.Available pulse width: 1 - 120 secDefault: 1 sec AUX nameThe names of "AUX", "OPEN" and "CLOSE" on the"Live" page can be changed.[AUX (Up to 10 characters)]Enter the name for "AUX" on the "Live" page.[OPEN (Up to 5 characters)]Enter the name for "OPEN" of "AUX" on the "Live" page.[CLOSE (Up to 5 characters)]Enter the name for "CLOSE" of "AUX" on the "Live"page.