Panasonic WV-NS202A Network Operating Instructions

Also see for Super Dynamic III WV-NS202A: Product catalog Integration note Brochure Reference Product catalog

Contents

Panasonic WV-NS202A Network Operating Instructions Manual pdf 63 page image

63Configure the settings relating to the authentication[Authentication setup]The settings relating to the authentication such as users and PCs restrictions for accessing the camera can be con-figured on this page.The "Authentication setup" page has 2 tabs of the [User] tab and the [Host] tab.Configure the settings relating to the user authentication [User]Click the [User] tab on the "Authentication setup" page. ( pages 20 and 21: How to display/operate the setupmenu)The settings relating to the user authentication can be configured on this page. Up to 16 users can be registered.Note:When user authentication (authentication error) has failed to pass 8 times within 30 seconds using the same IPaddress (PC), access to the camera will be denied for a while.[User authentication]Select "ON" or "OFF" to determine whether or not toauthenticate the users.Default: OFF[User name]Enter a user name.Number of characters for the user name: 1 - 32 char-actersDefault: None (blank)[Password] [Retype password]Enter the password.Number of characters for the password: 4 - 32 char-actersDefault: None (blank)Note:When the user name already in use is entered andthe [SET] button is clicked, the respective user infor-mation will be overwritten.[Access level]Select the access level of the user from the following.1. Administrator: Allowed all available operations ofthe camera.2. Camera control: Allowed to display images from thecamera and to control the camera. The camera set-ting configuration is unavailable.3. Live only: Only displaying live images is available.The camera setting configuration and camera con-trol are unavailable.Default: 3. Live onlyNote:By clicking [i] of "User name check", the registereduser can be selected and the selected user’s infor-mation can be checked.The registered user will be displayed with the accesslevel. (Example: admin [1])To delete the registered user, click the [DEL] buttonafter selecting the user to be deleted.Important:If all users whose access level is "1. Administrator"are deleted, it will be impossible to configure the set-tings.