Panasonic WV-NS202A Network Operating Instructions

Also see for Super Dynamic III WV-NS202A: Product catalog Integration note Brochure Reference Product catalog

Contents

Panasonic WV-NS202A Network Operating Instructions Manual pdf 75 page image

75Configure the settings relating to the schedules[Schedule setup]On the "Schedule" page, it is possible to determine time zones for when the following are available.• Alarm permission (Alarm input will be received only in the specified time zone.)• VMD permission (Video motion detection will be active only in the specified time zone.)• Access permission (Access to the camera will be allowed only in the specified time zone.)• Position refresh (Performing the position refresh will be allowed only in the specified time zone.)• 1 - 64 (Moving the camera to the designated preset position will be allowed only in the specified time zone.)"Alarm permission" can be configured only when "ON" is selected for any of "Terminal alarm 1", "Terminal alarm 2"and "Terminal alarm 3" ( page 53), and "VMD permission" can be configured only when "ON" is selected for "VMDalarm" ( page 53).Up to 5 schedules can be set.How to set the schedulesStep 1Select an action to be assigned to the schedule from"MODE".OFF: No action will be taken for the respective sched-ule.Alarm permission: Alarm input (terminal alarm 1, 2 and3) will be received during the period of the schedule.VMD permission: The Video motion detection (VMD)function will be active during the period of the sched-ule.Access permission: Users whose access level is setto 2 and 3 on the "User" page of "Authenticationsetup" ( page 63) can access the camera only inthe period of schedule.Position refresh: The camera position will be refreshedat the designated time in the schedule.1 - 64: The camera will move to the designated presetposition at the designated time in the schedule.Default: OFFNotes:• Select "ON" for "User authentication" on the "User"page of "Authentication setup" ( page 63) and"OFF" for "Host authentication" on the "Host" page( page 64) to validate "Access permission".• When selecting "Position refresh", it is recommend-ed to use together with the self return function( page 38).Step 2Select days of a week by checking the respectivecheckboxes.→ Time selection will become available.