FEATURESWall Mount BracketInstructionsModel No. WV-Q118/WV-Q118EPLACES OF INSTALLATIONAF0205-6012 3TR003444GAA Printed in JapanWall box● Wall BoxWood Siding BoardStrong enough to support thecamera weight(approx. 3 kg {6.60 lbs})● Wood Siding BoardConcrete slab Concrete slab● ConcreteTemplate(provided)Wall1 Make four holes in the wall using the template(provided).Protection Cover(provided)Part to be cut2 Wrap the camera cables with the ProtectionCover (provided) as appropriate to theDiecast Case.INSTALLATIONCut here4 Cut the Diecast Case as shown.Note: Be sure to protect the Video and PowerCables with the Protection Cover(provided ).MountingScrewRotate 15°Remove the Camera MountingBase by pulling up.3 Remove the Mounting Screw (M3, provided),pull up the Camera Mounting Base off thecamera, and turn the camera counterclock-wise.Wall mounting bracket:Attach the wall bracket to a concrete or other stur-dy wall to install the combination camera.There are various ways of installing the camera as shown below.Before attempting to connect or install this product,please read these instructions carefully andsave this manual for future use.The model number is abbreviated in some descrip-tions in this manual.• Fasten the bracket to a ceiling strong enoughto support the camera weight (approx. 3kg.{6.60 lbs}).• Wipe the bracket regularly using a soft anddry cloth, or a cloth moistened with a watersolution of an ordinary kitchen detergent.• Do not use chemicals for cleaning the enclo-sure as it may damage the surface.• All the necessary steps required for installingthis product must be taken by a qualified ser-vice person or system installer.PRECAUTIONS• Be sure to use the Fall Prevention Wire.• Do not use this bracket except with suitablecameras.• Follow all applicable local and national elec-trical, fire and safety codes when installingthe camera with this ceiling mount bracket.The model numbers in this Operating Instruc-tions are shown without suffix.