Panasonic WV-Q124 Operating Instructions Manual

Panasonic WV-Q124 Operating Instructions Manual Manual pdf 1 page image

Operating InstructionsIncluded Installation InstructionsMount BracketModel No. WV-Q124LOCKOPENFor U.S. and Canada:Panasonic System CommunicationsCompany of North America,Unit of Panasonic Corporationof North Americawww.panasonic.com/business/For customer support, call 1.800.528.6747Two Riverfront Plaza, Newark, NJ 07102-5490Panasonic Canada Inc.5770 Ambler Drive, Mississauga,Ontario, L4W 2T3 Canada(905)624-5010www.panasonic.ca© Panasonic System Networks Co., Ltd. 2014 Ns1214-0 PGQX1783ZA Printed in ChinaFor Europe and other countries:http://panasonic.netImporter's name and address to follow EU rules:Panasonic Testing CentrePanasonic Marketing Europe GmbHWinsbergring 15, 22525 Hamburg, GermanyBefore attempting to connect or install this product,please read these instructions carefully and save this manual for future use.The model number is abbreviated in some descriptions in this manual.SpecificationsAmbient operating temperature: –40 °C to +50 °C {–40 °F to 122 °F}Dimensions: Maximum diameter: ø176.0 mm {6-15/16 inches}Height: 131.0 mm {5-5/32 inches}Mass: Main body: Approx. 480 g {1.06 lbs}Finish: Main body: Aluminum die cast SilverPrefaceWV-Q124 (mount bracket) is designed to be used to install a fisheye camera or a dome camera foroutdoor use in the following ways.• When installing on a wall using together with WV-Q122A (wall mount bracket)PrecautionsRefer installation work to the dealer.Installation work requires technique and experiences. Failure to observe this may cause fire, electricshock, injury, or damage to the product.Be sure to consult the dealer.Periodic inspections shall be conducted.Rust on the metal parts or screws may cause a fall of the product resulting in injury or accidents.Consult the dealer for the inspections.The exclusively designed mount bracket shall be used.Failure to observe this may cause a drop resulting in injury or accidents.Use the exclusively designed mount bracket for installation.The screws and bolts must be tightened to the specified torque.Failure to observe this may cause a drop resulting in injury or accidents.Do not install this product in locations subject to vibration.Loosening of mounting screws or bolts may cause a fall of the product resulting in injury or accidents.Install this product in a location high enough to avoid people and objects frombumping the product.Failure to observe this may cause injury.The measures of protection against snowfall shall be taken.Weight of snow may cause a fall of the product resulting in injury or accidents.Protect the product against snowfall by installing under eaves.Avoid installing this bracket in the locations where salt damage occurs or corro-sive gas is produced.Otherwise, the mounting portions will deteriorate and accidents such as a fall of this product mayoccur.Do not strike or give a strong shock to this product.Failure to observe this may cause fire or injury.Do not hang down from this product or use this product as a pedestal.Failure to observe this may cause injury or accidents.Do not install the product in a windy place.Installation of the product in wind with a speed of 60 m/s or more may cause a drop resulting in acci-dents.Do not use this bracket except with suitable cameras.Failure to observe this may cause a drop resulting in injury or accidents.Do not rub the edges of metal parts with your hand.Strong rubbing may cause injury.Precautions for installationPanasonic assumes no responsibility for injuries or property damage resultingfrom failures arising out of improper installation or operation inconsistent withthis documentation.Power supplyUse a power supply device equipped with the ON-OFF switch for servicing. When the power cord ofthe product is connected to the power supply device, the power will be supplied to the product.Before cleaning the product, make sure that the power cable is not connected to the main powersupply.Take notice of humidity.Install this product when the humidity is low. If this product is installed during rainfall or at a highhumidity, the inside may be exposed to moisture and the dome cover may become foggy.Mounting method for this productThis product is designed to be used as a pendant mount camera. If the product is mounted on adesktop or at a slant, it may not work correctly and its lifetime may be shortened.Do not place this product in the following places:• Locations where a chemical agent is used such as a swimming pool• Locations subject to moisture or oil smoke such as a kitchen• Locations that have a specific environment that is subject to an inflammable atmosphere or sol-vents• Locations where radiation, x-ray, intense radio wave, or strong magnetism is produced• Locations where corrosive gas is produced, locations where it may be damaged by briny air suchas seashores• Locations where the temperature is not within the specified range (–40 °C to +50 °C {–40 °F to122 °F})• Locations subject to condensation as the result of severe changes in temperature(In case of installing the product in such locations, the dome cover may become foggy or con-densation may be caused on the cover.)• Locations subject to vibrations, such as on vehicles, marine vessels, or above product lines(This product is not designed for on-vehicle use.)Check before installationCompatibility of devices is restricted. Before installation, check the ratings and dimensions of thedevices to be used.Contact your dealer for details.Screw tightening• Do not use an impact driver. Use of an impact driver may damage the screws or cause tighteningexcessively.• When a screw is tightened, make the screw at a right angle to the surface. After tightening thescrews or bolts, perform checks to ensure that the tightening is sufficient enough so that there isno movement or looseness.Protection against lightningWhen cables are used outdoors, there is a chance that they may be affected by lightning. In thiscase, install a lightning arrester just before where the cables connect to the camera.Make sure to remove this product if it will no longer be used.The following cameras for outdoor use can be mounted on WV-Q124.For the latest information about the mountable models, refer to Panasonic support web site(http://security.panasonic.com/pss/security/support/info.html).WV-SW355, WV-SW559, WV-SW458, WV-SFV481WV-SFV631L, WV-SFV631LT, WV-SFV611L, WV-SFV311FeaturesCoverA Inner coverB Screw A x3(Fixing screw for the inner cover: M3 x 8 mm{5/16 inches})WV-Q122AWV-Q124CameraStandard accessoriesOperating Instructions (this document)......................................................................................... 1 setA Inner cover .............................................................................................................................. 1 pc.B Screw A (Fixing screw for the inner cover: M3 x 8 mm {5/16 inches}) .....4 pcs. (incl. 1 spare screw)C Base guide plate (For WV-SMR10) .......................................................................................... 1 pc.D Screw B (Fixing screw for the base guide plate: M4 x 8 mm {5/16 inches})..............................................................................................................5 pcs. (incl. 1 spare screw)E Screw C (Fixing screw for the network microphone attachment plate: M4 x 8 mm {5/16 inches})..............................................................................................................5 pcs. (incl. 1 spare screw)* For installation of WV-Q124 and a camera, the provided accessories of C base guide plate,D screw B and E screw C are unnecessary.Required parts other than the above• Accessories provided with the camera to be installedAttachment plate ................................................................................................................... 1 pc.Fixing screw for attachment plate (M4 x 8 mm {5/16 inches})............................................... 4 pcs.Major operating controls

/ 2

Related manuals for Panasonic WV-Q124