Base BracketModel No. WV-Q193WV-QJB501-WOperating InstructionsIncluded Installation InstructionsFs0520-0Printed in China© Panasonic i-PRO Sensing Solutions Co., Ltd. 2020For Europe and other countries:Panasonic Corporationhttp://www.panasonic.comPanasonic i-PRO Sensing Solutions Co., Ltd.Fukuoka, JapanAuthorised Representative in EU:Panasonic Testing CentrePanasonic Marketing Europe GmbHWinsbergring 15, 22525 Hamburg, GermanyFor U.S. and Canada:Panasonic i-PRO Sensing SolutionsCorporation of America800 Gessner Rd, Suite 700 Houston, TX 77024https://www.security.us.panasonic.com/Panasonic Canada Inc.5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada1-877-495-0580https://www.panasonic.com/ca/ Before attempting to connect or install this product, please read these instructionscarefully and save this manual for future use. The external appearance and other parts shown in this manual may differ from theactual product within the scope that will not interfere with normal use due toimprovement of the product. For other languages of this manual, refer to our support website(https://security.panasonic.com/training_support/documentation_database/).Panasonic i-PRO Sensing Solutions Co., Ltd. assumes no responsibility forinjuries or property damage resulting from failures arising out of improperinstallation or operation inconsistent with this documentation.Caution: Before attempting to connect or operate this product, please read these instructionscarefully.Notice: This equipment is not suitable for use in locations where children are likely to bepresent. Do not install this product in locations where ordinary persons can easily reach. For information about screws and brackets required for installation, refer to thecorresponding section of this document.PrecautionRefer installation work to the dealer.Installation work requires technique and experience. Failure to observe this may causefire, electric shock, injury, or damage to the product.Be sure to consult the dealer.When using this product, also read the “Precautions” described in the operatinginstructions for the camera to be attached.PrefaceMount the camera onto the ceiling or wall using this bracket.Use this bracket when conduits are used for wiring, or when there is no space availablefor wiring in the ceiling or the wall.For the latest information about the supported cameras, refer to our support website(https://security.panasonic.com/support/info/ ).SpecificationsAmbient operating temperature : –50 °C to +60 °C {–58 °F to +140 °F}Dimensions : ø164 mm × 41.4 mm (H){ø6-15/32 inches × 1-5/8 inches (H)}Mass : Approx. 450 g {0.99 lbs}Finish : Aluminum die cast WV-Q193 Light grayWV-QJB501-W i-PRO whitePrecautions for installation In order to prevent injury, the product must be securely mounted to the wall orceiling according to the Installation Guide of the camera. Make sure to remove this product if it will no longer be used.Standard AccessoriesOperating Instructions (this document) ...................................................................... 1 pc.Fixing screws for attachment plate (M4 × 8 mm {5/16 inches}) ............................... 5 pcs.(of them, 1 for spare)Template B (for the base bracket) ........................................................................ 1 sheetInstallationRefer to the Installation Guide of the camera for details of how to install thisbracket.For the latest information about the supported cameras, refer to our supportwebsite (https://security.panasonic.com/training_support/support/info/ No.: C0503>).