9Do not insert any foreign objects.Fire or electrical shock may be caused if wateror any foreign objects, such as metal objects,enter inside the unit.Turn the power off immediately and contactqualified service personnel for service.Do not use this product in an inflammableatmosphere.Failure to observe this may cause an explosionresulting in injury.Avoid installing this product in the loca-tions where salt damage occurs or corro-sive gas is produced.Otherwise, the mounting portions will deterio-rate and accidents such as a fall of the productmay occur.Do not strike or give a strong shock to thisproduct.Failure to observe this may cause fire or injury.Keep SDXC/SDHC/SD memory cardsaway from infants and children.Otherwise, they may swallow the cards bymistake.In this case, consult a doctor immediately.Do not hang down from this product oruse this product as a pedestal.Failure to observe this may cause a dropresulting in accidents.Do not damage the power cable.Do not damage, fabricate, twist, stretch, bun-dle, or forcibly bend the power cable. Do notplace heavy objects on it, and keep it awayfrom heat sources.Use of a damaged power cable may causeelectric shock, short circuit, or fire.Consult the dealer for repair.Do not attempt to disassemble or modifythis product.Failure to observe this may cause fire or electricshock.Consult the dealer for the repair or inspections.Do not install or clean the camera, ortouch this product, the power cable or theconnected cables during thunder storms.Failure to observe this may cause electric shock.Refer installation work to the dealer.Installation work requires technique and experi-ence. Failure to observe this may cause fire,electric shock, injury, or damage to the product.Be sure to consult the dealer.Stop the operation immediately whensomething is wrong with this product.When smoke goes up from the product, thesmell of smoke comes from the product, or theexterior of the product has deteriorated, con-tinued use will cause a fire or fall of the productresulting in injury, or damage to the product.In this case, turn the power off immediately andcontact qualified service personnel for service.Select an installation area that can sup-port the total weight.Selecting an inappropriate installation surfacemay cause this product to fall down or toppleover, resulting in injury or accidents.Installation work shall be started after sufficientreinforcement.Periodic inspections shall be conducted.Rust on the metal parts or screws may cause afall of the product resulting in injury or acci-dents.Consult the dealer for the inspections.The exclusively designed mount bracketshall be used.Failure to observe this may cause a dropresulting in injury or accidents.Use the exclusively designed mount bracket forinstallation.Precautions