Main functionsH.264/MPEG-4 and JPEG triple encodingH.264/MPEG-4 stream and JPEG (MJPEG) outputs can be simultaneously provided.* Either H.264 or MPEG-4 is selectable.Introduction of Super Dynamic (MEGA Super Dynamic)(☞ Operating Instructions (PDF))MEGA Super Dynamic compensates brightness on a pixel-to-pixel basis so that it produces clearer images even if objectshave various illumination intensities.Black & white modeImages will be displayed clear even at night since the camera will be automatically switched from the color mode to theblack and white mode under low illumination condition.Megapixel-compatible lens and high accuracy preset position functionA single camera provides wide area monitoring.The camera can be installed not only on the ceiling but also on the desktopWhen using an optional mount bracket, embedded installation on a ceiling or mounting on a wall is available.Power over Ethernet functionWhen connecting with a PoE (Power over Ethernet) device, power will be supplied by simply connecting a LAN cable.(IEEE802.3af compliant)Interactive communication with audioBy using the audio output connector and the microphone in connector, receiving audio from the cameras on a PC andtransmitting audio from the PC to the cameras is available.SDHC/SD memory card slot equippedIt is possible to save H.264 videos and JPEG images on the SDHC/SD memory card manually at an alarm occurrence,during the period of the schedule, or on a web browser. It is also possible to save JPEG images at a network failure occur-rence. (Download is possible.)* Recommended SDHC/SD memory card (☞ page 33)The network camera WV-SC385 is designed to operate using a PC on a network (10BASE-T/100BASE-TX).By connecting to a network (LAN) or the Internet, images and audio from the camera can be monitored on a PC via a net-work.Note:• It is necessary to configure the network settings of the PC and its network environment to monitor images and audiofrom the camera on the PC. It is also necessary to install a web browser on the PC.Preface6