Panasonic WV-SC386 Installation Manual

Also see for WV-SC386: Integration note Product catalog Operating instructions Operating instructions Operating instructions

Step 4Rotate the camera counterclockwise to detach the cam-era from the camera mount bracket (accessory).IMPORTANT:• When mounting the camera onto the camera mountbracket, hold the main body of the camera. Mountingthe camera while holding the dome cover may resultin malfunction.Step 5Detach the cables from the camera.Step 6Detach the safety wire from the camera.Detach the cameraThe camera is fixed on the camera mount bracket using the fixing screw. Remove the camera by following the instructionsbelow.IMPORTANT:• Do not detach the camera in a different way from the one described below. It may damage the camera.Step 1Detach the decorative cover from the camera.• Pull the decorative cover down to remove it from theceiling.• Release the stoppers by pressing the decorative coverin the direction of the arrows on the side decorativecover.Release both stoppers.Hold securely anddisengage them.Hold securely anddisengage them.IMPORTANT:• Make sure that no cable is pinched by the decorativecover.Step 2Detach the 12 V DC power cable plug (accessory) and theLAN cable from the camera, and then turn off the powerof the camera.20 °RotateCamera mount bracket(accessory)Main body ofthe cameraStep 3Remove the fixing screw (M3, accessory) that is fixing thecamera on the camera mount bracket (accessory).Do not lose the fixing screw.22