PrecautionsRefer installation work to the dealer.Installation work requires technique and experience.Failure to observe this may cause fire, electric shock,injury, or damage to the product.Be sure to consult the dealer.Stop the operation immediately when something iswrong with this product.When smoke goes up from the product, the smell ofsmoke comes from the product, or the exterior of theproduct has deteriorated, continued use will cause a fireor fall of the product resulting in injury, or damage to theproduct.In this case, turn the power off immediately and contactqualified service personnel for service.Do not attempt to disassemble or modify this prod-uct.Failure to observe this may cause fire or electric shock.Consult the dealer for the repair or inspections.Do not insert any foreign objects.Fire or electrical shock may be caused if water or any for-eign objects, such as metal objects, enter inside the unit.Turn the power off immediately and contact qualified ser-vice personnel for service.Select an installation area that can support the totalweight.Selecting an inappropriate installation surface may causethis product to fall down or topple over, resulting in injuryor accidents.Installation work shall be started after sufficient reinforce-ment.Periodic inspections shall be conducted.Rust on the metal parts or screws may cause a fall of theproduct resulting in injury or accidents.Consult the dealer for the inspections.Do not use this product in an inflammable atmo-sphere.Failure to observe this may cause an explosion resulting ininjury.Avoid installing this product in the locations wheresalt damage occurs or corrosive gas is produced.Otherwise, the mounting portions will deteriorate and acci-dents such as a fall of the product may occur.The measures of protection against a fall of thisproduct shall be taken.Failure to observe this may cause a drop resulting in injuryor accidents.Be sure to install the safety wire.The exclusively designed mount bracket shall beused.Failure to observe this may cause a drop resulting in injuryor accidents.Use the exclusively designed mount bracket for installa-tion.The screws and bolts must be tightened to thespecified torque.Failure to observe this may cause a drop resulting in injuryor accidents.Do not install this product in locations subject tovibration.Loosening of mounting screws or bolts may cause a fall ofthe product resulting in injury or accidents.Do not strike or give a strong shock to this product.Failure to observe this may cause fire or injury.Turn the power off when do wiring of this product.Failure to observe this may cause electric shock. In addi-tion, short circuit or wrong wiring may cause fire.Do not rub the edges of metal parts with your hand.Failure to observe this may cause injury.Do not touch the main body while this product ispanning/tilting.Fingers may be caught up in the moving part, and thatmay result in injury.Keep SDXC/SDHC/SD memory cards away frominfants and children.Otherwise, they may swallow the cards by mistake.In this case, consult a doctor immediately.Do not install or clean the camera, or touch thisproduct, the power cable or the connected cablesduring thunder storms.Failure to observe this may cause electric shock.Install this product in a location high enough toavoid people and objects from bumping the product.Failure to observe this may cause injury.Do not hang down from this product or use thisproduct as a pedestal.Failure to observe this may cause a drop resulting in acci-dents.9