Note• When the [Authentication] setting has been changed, close the web browser, and then access thecamera again.• For other devices such as other i-PRO series cameras or network disk recorders, unless otherwisestated, Digest authentication is not supported. (As of May 2011)[User name]Enter a user name.• Available number of characters: 1 - 32 characters• Default: None (blank)[Password] [Retype password]Enter a password.• Available number of characters: 4 - 32 characters• Default: None (blank)Note• When the user name already in use is entered and the [Set] button is clicked, the respective userinformation will be overwritten.[Access level]Select the access level of the user from the following.• 1. Administrator: Allowed all available operations of the camera.• 2. Camera control: Allowed to display images from the camera and to control the camera. The camerasetting configuration is unavailable.• 3. Live only: Only displaying live images is available. The camera setting configuration and camera controlare unavailable.• Default: 3. Live only[User check]From the pull-down menu of “User check”, the registered user can be selected and the selected user’sinformation can be checked.The registered user will be displayed with the access level.(Example: admin [1])To delete the registered user, click the [Delete] button after selecting the user to be deleted.15.2 Configure the settings relating to the hostauthentication [Host auth.]Click the [Host auth.] tab on the “User mng.” page. (®page 32, page 34)Operating Instructions 10315 Configure the settings relating to the authentication [User mng.]
