Panasonic WV-SF448 Installation Manual

Also see for WV-SF448: Operating instructions

Contents

Panasonic WV-SF448 Installation Manual Manual pdf 31 page image

31Configure the network settingsConfiguring the camera so that it can be accessed from a PCThe following are descriptions for when the camera with default settings is configured. If youare using firewall software on your PC, the Setup Program may not be able to find anycameras on your network. Configure the setting of the camera after temporarily invalidatingthe firewall software. Contact the network administrator or your Internet service provider forinformation about configuring the settings of the network.z Insert the provided CD-ROM into the CD-ROM drive of your PC.• The License Agreement will be displayed. Read the Agreement and choose “I accept theterm in the license agreement”, and click [OK].• The launcher window will be displayed. If the launcher window is not displayed, doubleclick the “CDLauncher.exe” file on the CD-ROM.Note:• Refer to “Using the CD-ROM” in the Operating Instructions on the provided CD-ROM forfurther information about CDLauncher.x Click the [Run] button next to [IP Setting Software].[Panasonic IP Setting] screen will be displayed. Click the [Network Settings] button after select-ing the MAC address/IP address of the camera to be configured.