3 Record images on the SD memory cardmanuallyImages displayed on the “Live” page can be recorded on the SD memory card manually. This button is operableonly when “Manual” is selected for “Save trigger” on the [SD memory card] tab on the “Basic” page of the setupmenu. (®page 53)It is possible to select “JPEG(1)”, “JPEG(2)”, “JPEG(3)”, “H.264(1)”, “H.264(2)”, “H.264(3)”, or “H.264(4)” on“Recording format” of the setup menu. (®page 52) When “JPEG” is selected for “Recording format”, stillimage data are recorded. When “H.264(1)”, “H.264(2)”, “H.264(3)”, or “H.264(4)” is selected, video data arerecorded.Images recorded on the SD memory card can be copied onto the PC. (®page 59)1. Display the “Live” page. (®page 7)2. Click the [SD] button.→ The SD recording window will open.3. Click the [Start] button to start recording images on the SD memory card. The SD recording status indicatorwill light red (®page 9) while images are being recorded on the SD memory card.The image saving interval can be configured on the [SD memory card] tab of the “Basic” page.(®page 53)4. Click the [Stop] button to stop saving images on the SD memory card.® The SD recording status indicator will turn off.5. Click the [Close] button to close the window.Note• Image data saved on Drive E can be obtained by executing “Access img.” on the [SD memory card]tab and logging in from the user authentication window (®page 59).The destination to save image data is a fixed directory on Drive E (®page 209).24 Operating Instructions3 Record images on the SD memory card manually
