[Aperture level]Adjust the aperture level (outline compensation).Images will be sharper when the cursor is moved in the “+” direction, and will be softer when the cursor ismoved in the “-” direction. Click the [Reset] button to reset the color to the default.• Default: 16[Pedestal level]Adjust the black level of images by moving the cursor.When the cursor is moved to the “+” direction, images will become brighter. When the cursor is moved to the“-” direction, images will be darker. Click the [Reset] button to reset the color to the default.• Default: 128[Fog compensation]Select “On” or “Off” to determine whether or not to activate the fog compensation function. When “On(High)”or “On(Normal)” is selected for “Super Dynamic(SD)”, or when “On” is selected for “Adaptive black stretch”,this setting is not available.The fog compensation function can make dim images that have been affected by fog or other conditions clearerusing digital image processing.• On: Activates the fog compensation function.• Off: Stops the fog compensation function.• Default: Off[Level]Adjust the fog compensation level.The level of fog compensation will increase when the cursor is moved in the “+” direction, and decrease whenthe cursor is moved in the “-” direction. Click the [Reset] button to reset to the default setting.Default: 64[Scene file]The combination of settings used to adjust image quality can be saved as a scene file. The scene file can beselected here.Registered scene files can be configured in the “Schedule” page (®page 177). If the timing of when imagesare viewed greatly affects the area where images are viewed, registering scene files to the schedule can letyou match a combination of settings to different times of day in order to view images in the best conditions.[Scene file title]The scene file name (up to 10 characters) displayed in “Scene file” can be changed. Only file names displayedin “1:” and “2:” can be changed.Unavailable characters: " &[Load] buttonLoads the setting data selected in “Scene file” and changes the current image accordingly.[Register] buttonThe combination of settings used to adjust image quality that are currently displayed can be registered to thescene file displayed in “Scene file”.[Close] buttonClick this button to quit the “Image adjust” setup menu.92 Operating Instructions11 Configure the settings relating to images and audio [Image/Audio]
