11Do not use this product in an inflammableatmosphere.Failure to observe this may cause an explosionresulting in injury.Avoid installing this product in the loca-tions where salt damage occurs or corro-sive gas is produced.Otherwise, the mounting portions will deterio-rate and accidents such as a fall of the productmay occur.The exclusively designed mount bracketshall be used.Failure to observe this may cause a dropresulting in injury or accidents.Use the exclusively designed mount bracket forinstallation.The screws and bolts must be tightened tothe specified torque.Failure to observe this may cause a dropresulting in injury or accidents.Do not install this product in locationssubject to vibration.Loosening of mounting screws or bolts maycause a fall of the product resulting in injury oraccidents.Do not strike or give a strong shock to thisproduct.Failure to observe this may cause fire or injury.Turn the power off when do wiring of thisproduct.Failure to observe this may cause electricshock. In addition, short circuit or wrong wiringmay cause fire.Keep SDXC/SDHC/SD memory cardsaway from infants and children.Otherwise, they may swallow the cards bymistake.In this case, consult a doctor immediately.Do not install or clean the camera, ortouch this product, the power cable or theconnected cables during thunder storms.Failure to observe this may cause electricshock.Install this product in a location highenough to avoid people and objects frombumping the product.Failure to observe this may cause injury.Do not hang down from this product oruse this product as a pedestal.Failure to observe this may cause a dropresulting in accidents.Do not damage the power cable.Do not damage, fabricate, twist, stretch, bun-dle, or forcibly bend the power cable. Do notplace heavy objects on it, and keep it awayfrom heat sources.Use of a damaged power cable may causeelectric shock, short circuit, or fire.Consult the dealer for repair.Correctly perform all wiringShort circuits in the wiring or incorrect wiringmay cause fire or electrical shock.Turn the power off when cleaning thisproduct.Failure to observe this may cause injury.Do not rub the edges of metal parts withyour hand.Failure to observe this may cause injury.[Precautions for use]To keep on using with stable performanceDo not use this product in hot and humid con-ditions for a long time. Failure to observe thiscauses component degradation resulting in lifeshortening of this product. Do not expose thisproduct to direct heat sources such as a heater.