[Post alarm]• Transmission intervalSelect the transmission interval for the alarm image transmission to the FTP server from the following.0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fps• Default: 1fps• Number of imagesSelect the number of images to be transmitted from the following.1pic/ 2pics/ 3pics/ 4pics/ 5pics/ 6pics/ 7pics/ 8pics/ 9pics/ 10pics/ 20pics/ 30pics/ 50pics/ 100pics/ 200pics/300pics/ 500pics/ 1000pics/ 1500pics/ 2000pics/ 3000pics• Default: 100pics• Recording durationApproximate time to be taken to save the set “Number of images” with the set “Transmission interval” willbe displayed.[Image capture size]Select the image capture size of images transmitted when an alarm occurs from the following.JPEG(1)/JPEG(2)/JPEG(3)• Default: JPEG(2)FTP periodic image transmission[FTP periodic image transmission]Select “On” or “Off” to determine whether or not to transmit images using the FTP periodic image transmissionfunction.When “On” is selected, it is necessary to configure the settings of the FTP server.• Default: OffIMPORTANT• When using FTP periodic image transmission, it is necessary to configure the schedule settings of FTPperiodic image transmission on the [Schedule] tab of the “Schedule” page. (®Page 189)[Directory name]Enter the directory name where the images are to be saved.For example, enter “/img” to designate the directory “img” under the root directory of the FTP server.• Available number of characters: 1 - 256 characters• Unavailable characters: " & ;• Default: None (blank)[File name]Enter the file name (name of the image file to be transmitted) and select the naming option from the following.• Name w/time&date: File name will be [“Entered file name” + “Time and date (year/ month/ day/ hour/minute/ second)” + “Serial number (starting from 00)”].• Name w/o time&date: File name will be the characters entered for “File name” only. When “Name w/otime&date” is selected, the file will be overwritten each time a file is newly transmitted.• Available number of characters: 1 - 32 characters• Unavailable characters: " & ; : / * < > ? \ |• Default: None (blank)Note• When “Name w/time&date” is selected, the file name will be [“Entered file name” + “Time and date(year/ month/ day/ hour/ minute/ second)” + “Serial number (starting from 00)”] + “s” during summertime.Operating Instructions 16116 Configuring the network settings [Network]
