• Schedule: Saves images in accordance with the settings for “Schedule” (®page 189). Available only forthe “H.264(1)”, “H.264(2)”, “H.264(3)”, or “H.264(4)” images.• Default:– Recording stream 1: FTP error– Recording stream 2: Alarm inputNote• When “H.264(1)”, “H.264(2)”, “H.264(3)”, or “H.264(4)” is selected for “Recording format”, “FTPerror” is unavailable.• When “JPEG(1)”, “JPEG(2)”, or “JPEG(3)” is selected for “Recording format”, “Schedule” isunavailable.JPEG recording(Manual)This setting is only available when “JPEG(1)”, “JPEG(2)”, or “JPEG(3)” is selected for “Recording format”, and“Manual” is selected for “Save trigger”.[File name]Enter the file name used for the image to be saved on the SD memory card. The file name will be as follows.• File name: [“Entered file name” + “Time and date (year/ month/ day/ hour/ minute/ second)”] + “Serialnumber”• Available number of characters: 1 - 8 characters• Unavailable characters: " & * / : ; < > ? \ |[Image saving interval]When “Manual” is selected for “Save trigger”, select an interval (frame rate) of saving images on the SD memorycard from the following.0.1fps/0.2fps/0.33fps/0.5fps/1fps• Default: 1fpsJPEG recording(Alarm)This setting is only available when “JPEG(1)”, “JPEG(2)”, or “JPEG(3)” is selected for “Recording format”, and“Alarm input” is selected for “Save trigger”.[File name]Enter the file name used for the image to be saved on the SD memory card. The file name will be as follows.• File name: [“Entered file name” + “Time and date (year/ month/ day/ hour/ minute/ second)”] + “Serialnumber”Operating Instructions 5910 Configure the basic settings of the camera [Basic]
